Journal articles
IMMC
SST/IMMC
2018
Mahanta, P. ; Saha, U.K. ; Zayoud, Azd. A Novel Method of Pure Oxy-fuel Circulating Fluidized Bed Combustion with Zero Recirculation Flue Gas – Experimental Validation. In: Materials Today: Proceedings, Vol. 5, no. 11, p. 23136-23147 (2018). doi:10.1016/j.matpr.2018.11.044.
2018
Coutel, Xavier ; Olejnik, Cécile ; Marchandise, Pierre ; Delattre, Jérôme ; Béhal, Hélène ; Kerckhofs, Greet ; Penel, Guillaume. A Novel microCT Method for Bone and Marrow Adipose Tissue Alignment Identifies Key Differences Between Mandible and Tibia in Rats.. In: Calcified tissue international, Vol. 103, no. 2, p. 189-197 (2018). doi:10.1007/s00223-018-0397-1.
2018
Parmentier, Philippe ; Winckelmans, Grégoire ; Chatelain, Philippe. A Vortex Particle-Mesh method for subsonic compressible flows. In: Journal of Computational Physics, Vol. 354, p. 692-716 (1 February 2018). doi:10.1016/j.jcp.2017.10.040.
2018
Delandmeter, Philippe ; Lambrechts, Jonathan ; Legat, Vincent ; Vallaeys, Valentin ; Naithani, Jaya ; Thiery, Wim ; Remacle, Jean-François ; Deleersnijder, Eric. A fully consistent and conservative vertically adaptive coordinate system for SLIM 3D v0.4 with an application to the thermocline oscillations of Lake Tanganyika. In: Geoscientific Model Development, Vol. 11, no.3, p. 1161-1179 (2018). doi:10.5194/gmd-11-1161-2018.
2018
Hou, Yuliang ; Sapanathan, Thaneshan ; Dumon, Alexandre ; Culière, Pierre ; Rachik, Mohamed. A novel development of bi-level reduced surrogate model to predict ductile fracture behaviors. In: Engineering Fracture Mechanics, Vol. 188, p. 232-249 (2018). doi:10.1016/j.engfracmech.2017.08.021.
2018
Vincent, David ; Karatekin, Özgür ; Lambrechts, Jonathan ; Lorenz, Ralph D. ; Dehant, Véronique ; Deleersnijder, Eric. A numerical study of tides in Titan′s northern seas, Kraken and Ligeia Maria. In: Icarus, Vol. 310, p. 105-126 (2018). doi:10.1016/j.icarus.2017.12.018.
2018
Cao, Wenchao ; Sun, Tao ; Kerckhofs, Greet ; Fardell, Gemma ; Price, Ben ; Dewulf, Wim. A simulation-based study on the influence of the x-ray spectrum on the performance of multi-material beam hardening correction algorithms. In: Measurement Science and Technology, Vol. 29, no. 9, p. 095002 (2018). doi:10.1088/1361-6501/aacba0.
2018
Habibi, Hamed ; Rahimi Nohooji, Hamed ; Howard, Ian. Adaptive PID Control of Wind Turbines for Power Regulation With Unknown Control Direction and Actuator Faults. In: IEEE Access, Vol. 6, p. 37464-37479 (2018). doi:10.1109/access.2018.2853090.
2018
Ye, Wenyuan ; Lin, Jiuyang ; Borrego, Ricard ; Chen, Dong ; Sotto, Arcadio ; Luis Alconero, Patricia ; Liu, Minghua ; Zhao, Shuaifei ; Tang, Chuyang Y. ; Van der Bruggen, Bart. Advanced desalination of dye/NaCl mixtures by a loose nanofiltration membrane for digital ink-jet printing. In: Separation and Purification Technology, Vol. 197, no. 1, p. 27-35 (2018). doi:10.1016/j.seppur.2017.12.045.
2018
Moens, Maud ; Duponcheel, Matthieu ; Winckelmans, Grégoire ; Chatelain, Philippe. An Actuator Disk method with tip-loss correction based on local effective upstream velocities. In: Wind Energy, Vol. 21, no. 9, p. 766-782. doi:10.1002/we.2192.
2018
Fang, Yu ; De Lorenzo, Marco ; Lafon, Philippe ; Poncet, Sébastien ; Bartosiewicz, Yann. An accurate and efficient look-up table equation of state for two-phase compressible flow simulations of carbon dioxide. In: Industrial & Engineering Chemistry Research, , no.57, p. 7676-7691 (2018). doi:10.1021/acs.iecr.8b00507.
2018
Descamps, Thierry ; Monhonval, Michel ; Latteur, Pierre. An assessment methodology for timber beams in a restoration context, based on a dimensionless formulation of EC5 design criteria. In: International Journal of Architectural Heritage, Vol. Volume 12, 2018, no.12, p. 726-733. doi:10.1080/15583058.2018.1442527.
2018
Tie, Ying ; Hou, Yuliang ; Li, Cheng ; Zhou, Xihui ; Sapanathan, Thaneshan ; Rachik, Mohamed. An insight into the low-velocity impact behavior of patch-repaired CFRP laminates using numerical and experimental approaches. In: Composite Structures, Vol. 190, p. 179-188 (2018). doi:10.1016/j.compstruct.2018.01.075.
2018
Iavarone, S. ; Oreluk, J. ; Smith, S.T. ; Hegde, A. ; Li, W. ; Packard, A. ; Frenklach, M. ; Smith, P.J. ; Contino, Francesco ; Parente, A.. Application of Bound-to-Bound Data Collaboration approach for development and uncertainty quantification of a reduced char combustion model. In: Fuel, Vol. 232, p. 769-779 (2018). doi:10.1016/j.fuel.2018.05.113.
2018
Li, Wenqi ; Sreerangappa, Ramesh ; Estager, Julien ; Monbaliu, Jean-Christophe M. ; Debecker, Damien P. ; Luis Alconero, Patricia. Application of pervaporation in the bio-production of glycerol carbonate. In: Chemical Engineering and Processing - Process Intensification, Vol. 132, p. 127-136 (2018). doi:10.1016/j.cep.2018.08.014.
2018
Li, Z. ; Lewandowski, M.T. ; Contino, Francesco ; Parente, A.. Assessment of On-the-Fly Chemistry Reduction and Tabulation Approaches for the Simulation of Moderate or Intense Low-Oxygen Dilution Combustion. In: Energy and Fuels, Vol. 32, no.10, p. 10121-10131 (2018). doi:10.1021/acs.energyfuels.8b01001.
2018
Dadi, Dessalegn ; Mengistie, Embialle ; Terefe, Gudina ; Getahun, Tadesse ; Haddis, Alemayehu ; Birke, Wondwossen ; Beyene, Abebe ; Luis Alconero, Patricia ; Van der Bruggen, Bart. Assessment of the effluent quality of wet coffee processing wastewater and its influence on downstream water quality. In: Ecohydrology & Hydrobiology, Vol. 18, no. 2, p. 201-211 (2017). doi:10.1016/j.ecohyd.2017.10.007.
2018
Van der Noot, Nicolas ; Ijspeert, Auke Jan ; Ronsse, Renaud. Bio-inspired controller achieving forward speed modulation with a 3D bipedal walker. In: The International Journal of Robotics Research, Vol. 37, p. 168-196 (2018). doi:10.1177/0278364917743320.
2018
Bridging Scales in Modelling and Simulation of Non-Reacting and Reacting Flows. Part I. In: Advances in Chemical Engineering, Vol. 52, p. 2-192 (2018).
2018
Bridging Scales in Modelling and Simulation of Non-Reacting and Reacting Flows. Part II. In: Advances in Chemical Engineering, Vol. 53, p. 2-245 (2018).
2018
Bourgeois, Nicolas ; Goldsborough, S.S. ; Jeanmart, Hervé ; Contino, Francesco. CFD simulations of Rapid Compression Machines using detailed chemistry: Evaluation of the ‘crevice containment’ concept. In: Combustion and Flame, Vol. 189, p. 225-239 (2018). doi:10.1016/j.combustflame.2017.10.033.
2018
Ruiz Salmon, Israel ; Cambier, Nicolas ; Luis Alconero, Patricia. CO2 Capture by Alkaline Solution for Carbonate Production: A Comparison between a Packed Column and a Membrane Contactor. In: Applied Sciences, Vol. 8, no.6, p. 996 (2018). doi:10.3390/app8060996.
2018
Ren, Xueping ; Chen, Xiaohui ; Xiong, Zhiping. Characterization and analysis of diffusion bonding process in a Cr25Ni7Mo4MnSi duplex stainless steel. In: Journal of Manufacturing Processes, Vol. 34, p. 603-613 (2018). doi:10.1016/j.jmapro.2018.07.005.
2018
Weng, Yaoyao ; Jia, Zhihong ; Ding, Lipeng ; Muraishi, Shinji ; Liu, Qing. Clustering behavior during natural aging and artificial aging in Al-Mg-Si alloys with different Ag and Cu addition. In: Materials Science and Engineering: A, Vol. 732, p. 273-283 (2018). doi:10.1016/j.msea.2018.07.018.
2018
Raoelison, Rija Nirina ; Xie, Yingchun ; Sapanathan, Thaneshan ; Planche, Marie Pierre ; Kromer, Robin ; Costil, Sophie ; Langlade, Cécile. Cold gas dynamic spray technology: A comprehensive review of processing conditions for various technological developments till to date. In: Additive Manufacturing, Vol. 19, p. 134-159 (2018). doi:10.1016/j.addma.2017.07.001.
2018
Amani, Yasin ; Dancette, Sylvain ; Delroisse, Pauline ; Simar, Aude ; Maire, Eric. Compression behavior of lattice structures produced by selective laser melting: X-ray tomography based experimental and finite element approaches. In: Acta Materialia, Vol. 159, p. 395-407 (2018). doi:10.1016/j.actamat.2018.08.030.
2018
Amelio, Antonio ; Figueroa Paredes, Danilo Alexander ; Degrève, Jan ; Luis Alconero, Patricia ; Van der Bruggen, Bart ; Espinosa, José. Conceptual model-based design and environmental evaluation of waste solvent technologies: Application to the separation of the mixture acetone-water. In: Separation Science and Technology, Vol. 53, no. 11, p. 1791-1810 (2018). doi:10.1080/01496395.2018.1442858.
2018
Franzini Fabian ; Soares Frazao, Sandra. Coupled finite-volume scheme with adapted Augmented Roe scheme for simulating morphological evolution in arbitrary cross-sections. In: Journal of Hydroinformatics, Vol. 20, no. 5, p. 1111-1130 (2018). doi:10.2166/hydro.2018.109.
2018
Rosso, Angelica ; Jimenez-Roa, Lisandro A. ; Saraiva Esteves Pacheco De Almeida, João ; Zuniga, Aydee Patricia Guerrero ; Blandón, Carlos A. ; Bonett, Ricardo L. ; Beyer, Katrin. Cyclic tensile-compressive tests on thin concrete boundary elements with a single layer of reinforcement prone to out-of-plane instability. In: Bulletin of Earthquake Engineering, Vol. 16, no. 2, p. 859-887 (2018). doi:10.1007/s10518-017-0228-1.
2018
Duisit, Jérôme ; Orlando, Giuseppe ; Debluts, Donovan ; Maistriaux, Louis ; Xhema, Daela ; de Bisthoven, Yann-Alex J ; Galli, Cesare ; Peloso, Andrea ; Behets Wydemans, Catherine ; Lengelé, Benoît ; Gianello, Pierre. Decellularization of the Porcine Ear Generates a Biocompatible, Nonimmunogenic Extracellular Matrix Platform for Face Subunit Bioengineering.. In: Annals of Surgery, Vol. 267, no. 6, p. 1191-1201 (2018). doi:10.1097/SLA.0000000000002181.
2018
Ji, Wei ; Kerckhofs, Greet ; Geeroms, Carla ; Marechal, Marina ; Geris, Liesbet ; Luyten, Frank P. Deciphering the combined effect of bone morphogenetic protein 6 and calcium phosphate on bone formation capacity of periosteum derived cells-based tissue engineering constructs.. In: Acta biomaterialia, Vol. 80, p. 97-107 (2018). doi:10.1016/j.actbio.2018.09.046.
2018
Georgiou, Michail ; Papalexandris, Miltiadis. Direct numerical simulation of turbulent heat transfer in a T-junction. In: Journal of Fluid Mechanics, Vol. 845, p. 581-614 (2018). doi:10.1017/jfm.2018.256.
2018
Vallaeys, Valentin ; Kärnä, Tuomas ; Delandmeter, Philippe ; Lambrechts, Jonathan ; Baptista, António M. ; Deleersnijder, Eric ; Hanert, Emmanuel. Discontinuous Galerkin modeling of the Columbia River’s coupled estuary-plume dynamics. In: Ocean Modelling, Vol. 124, p. 111-124 (2018). doi:10.1016/j.ocemod.2018.02.004.
2018
Samaee, Vahid ; Gatti, Riccardo ; Devincre, Benoit ; Pardoen, Thomas ; Schryvers, Dominique ; Idrissi, Hosni. Dislocation driven nanosample plasticity: new insights from quantitative in-situ TEM tensile testing.. In: Scientific reports, Vol. 8, no.1, p. 12012 (2018). doi:10.1038/s41598-018-30639-8.
2018
Xiong, Zhiping ; Jacques, Pascal ; Perlade, Astrid ; Pardoen, Thomas. Ductile and intergranular brittle fracture in a two-step quenching and partitioning steel. In: Scripta Materialia, Vol. 157, p. 6-9 (2018). doi:10.1016/j.scriptamat.2018.07.030.
2018
Van Verdeghem, Joachim ; Lefebvre, Martin ; Kluyskens, Virginie ; Dehez, Bruno. Dynamical Modelling of Passively Levitated Electrodynamic Thrust Self-Bearing Machines. In: IEEE Transactions on Industry Applications, Vol. 55, no. 2, p. 1447-1460 (March-April 2019). doi:10.1109/TIA.2018.2880422.
2018
Bhaduri, S. ; Jeanmart, Hervé ; Contino, Francesco. EGR control on operation of a tar tolerant HCCI engine with simulated syngas from biomass. In: Applied Energy, Vol. 227, p. 159-167 (2018). doi:10.1016/j.apenergy.2017.08.233.
2018
Lumbeeck, Gunnar ; Idrissi, Hosni ; Amin-Ahmadi, Behnam ; Favache, Audrey ; Delmelle, Renaud ; Samaee, Vahid ; Proost, Joris ; Pardoen, Thomas ; Schryvers, Dominique. Effect of hydriding induced defects on the small-scale plasticity mechanisms in nanocrystalline palladium thin films. In: Journal of Applied Physics, Vol. 124, no.22, p. 225105 (2018). doi:https://doi.org/10.1063/1.5055274. doi:10.1063/1.5055274.
2018
Johnen, A. ; Geuzaine, C. ; Toulorge, T. ; Remacle, J.-F.. Efficient computation of the minimum of shape quality measures on curvilinear finite elements. In: CAD Computer Aided Design, Vol. 103, p. 24-33 (2018). doi:10.1016/j.cad.2018.03.001.
2018
Limpens, Gauthier ; Jeanmart, Hervé. Electricity storage needs for the energy transition : an EROI based analysis illustrated by the case of Belgium. In: Energy, Vol. 152, p. 960-973 (01/06/2018). doi:10.1016/j.energy.2018.03.180.
2018
Poulain, Raphaël ; Klein, Andreas ; Proost, Joris. Electro‐catalytic properties of (100), (110) and (111) oriented NiO thin films towards the Oxygen evolution reaction. In: The Journal of Physical Chemistry Part C: Nanomaterials and Interfaces, Vol. 122, p. 22252-22263 (2018). doi:10.1021/acs.jpcc.8b05790.
2018
Delmelle, Renaud ; Terreni, Jasmin ; Remhof, Arndt ; Heel, Andre ; Proost, Joris ; Borschulte, Andreas. Evolution of Water Diffusion in a Sorption-Enhanced Methanation Catalyst. In: Catalysts, Vol. 8, no.9, p. 341 (2018). doi:10.3390/catal8090341 (registering DOI).
2018
Mbuyi Katshiatshia, Haddy ; Dias, Véronique ; Jeanmart, Hervé. Experimental and numerical study of ethyl valerate flat flames at low pressure. In: Combustion Science and Technology, Vol. 190, no. 4, p. 632-662 (2018). doi:10.1080/00102202.2017.1403910.
2018
Coudou, Nicolas ; Buckingham, Sophia ; Bricteux, Laurent ; van Beeck, Jeroen. Experimental study on the wake meandering within a scale model wind farm subject to a wind-tunnel flow simulating an atmospheric boundary layer. In: Boundary-Layer Meteorology, Vol. 167, no.1, p. 77-98 (2018). doi:10.1007/s10546-017-0320-8.
2018
Grosshans, Holger ; Papalexandris, Miltiadis. Exploring the mechanism of inter-particle charge diffusion. In: The European Physical Journal - Applied Physics, Vol. 82, p. #11101 (2018). doi:10.1051/epjap/2018170360.
2018
Remacle, Jean-François ; Lambrechts, Jonathan. Fast and robust mesh generation on the sphere—Application to coastal domains. In: Computer-Aided Design, Vol. 103, p. 14-23 (2018). doi:10.1016/j.cad.2018.03.002.
2018
Gillis, Thomas ; Winckelmans, Grégoire ; Chatelain, Philippe. Fast immersed interface Poisson solver for 3D unbounded problems around arbitrary geometries. In: Journal of Computational Physics, Vol. 354, p. 403-416 (1 February 2018). doi:10.1016/j.jcp.2017.10.042.
2018
Saadouki, Bouchra ; Sapanathan, Thaneshan ; Pelca, Philippe ; Elghorba, Mohamed ; Rachik, Mohamed. Fatigue damage in fieldshapers used during electromagnetic forming and welding processes at high frequency impulse current. In: International Journal of Fatigue, Vol. 109, p. 93-102 (2018). doi:10.1016/j.ijfatigue.2017.12.019.
2018
Goessens, Sébastien ; Mueller, Caitlin ; Latteur, Pierre. Feasibility study for drone-based masonry construction of real-scale structures. In: Automation in Construction, Vol. 94, p. 458-480 (2018).
2018
Liu, H. ; Lin, Fengxiang ; Zhao, P. ; Moelans, N. ; Wang, Y. ; Nie, J.F.. Formation and autocatalytic nucleation of co-zone {101¯2} deformation twins in polycrystalline Mg: A phase field simulation study. In: Acta Materialia, Vol. 153, no.153, p. 86-107 (2018). doi:10.1016/j.actamat.2018.04.043.
2018
de Kerchove, Laurent ; Momeni, Mona ; Aphram, Gaby ; Watremez, Christine ; Bollen, Xavier ; Jashari, Ramadan ; Boodhwani, Munir ; Astarci, Parla ; Noirhomme, Philippe ; El Khoury, Gebrine. Free margin length and coaptation surface area in normal tricuspid aortic valve: an anatomical study. In: European Journal of Cardio-Thoracic Surgery, Vol. 53, no. 5, p. 1040-1048 (2018). doi:10.1093/ejcts/ezx456.
2018
Ratan, Sanjiv ; De Wilde, Juray. Gearing up for future steam reforming. In: Nitrogen + Syngas, Vol. 353, p. 44-48 (2018).
2018
Poncelet, Olivier ; Rasson, Jonathan ; Tuyaerts, Romain ; Coulombier, Michaël ; Kotipalli, Ratan Raja Venkata ; Raskin, Jean-Pierre ; Francis, Laurent. Hemispherical cavities on silicon substrates: an overview of micro fabrication techniques. In: Materials Research Express, Vol. 5, no. 4, p. 045702 (2018). doi:10.1088/2053-1591/aab907.
2018
Frère, Ariane ; Hillewaert, Koen ; Chatelain, Philippe ; Winckelmans, Grégoire. High Reynolds Number Airfoil: From Wall-Resolved to Wall-Modeled LES. In: Flow, Turbulence and Combustion, Vol. 101, no. 2, p. 457–476. doi:10.1007/s10494-018-9972-9.
2018
Simar, Aude ; Godet, Stéphane ; Watkins, Thomas R.. Highlights of the special issue on metal additive manufacturing. In: Materials Characterization, Vol. 143, p. 1-4 (2018). doi:10.1016/j.matchar.2018.06.013.
2018
Bourgeois, Nicolas ; Jeanmart, Hervé ; Winckelmans, Grégoire ; Lamberts, Olivier ; Contino, Francesco. How to ensure the interpretability of experimental data in Rapid Compression Machines? A method to validate piston crevice designs. In: Combustion and Flame, Vol. 198, p. 393-411 (2018). doi:10.1016/j.combustflame.2018.09.030.
2018
Pellerin, J. ; Johnen, A. ; Verhetsel, K. ; Remacle, J.-F.. Identifying combinations of tetrahedra into hexahedra: A vertex based strategy. In: CAD Computer Aided Design, Vol. 105, p. 1-10 (2018). doi:10.1016/j.cad.2018.05.004 (Soumis).
2018
Lin, Fengxiang ; Zhang, Yubin ; Pantleon, Wolfgang ; Juul Jensen, Dorte. Importance of Non-uniform Boundary Migration for Recrystallization Kinetics. In: Metallurgical and Materials Transactions A, Vol. 49, no.11, p. 5246-5258 (2018). doi:10.1007/s11661-018-4846-2.
2018
Piret, Nicolas ; Santoro, Ronny ; Dogot, Loïck ; Barthélemy, Bastien ; Peyroux, Eugénie ; Proost, Joris. Influence of glass composition on the kinetics of glass etching and frosting in concentrated HF solutions. In: Journal of Non-Crystalline Solids, Vol. 499, p. 208-216 (2018). doi:10.1016/j.jnoncrysol.2018.07.030.
2018
Grosshans, Holger ; Szasz, Robert_Zoltan ; Papalexandris, Miltiadis. Influence of the Rotor Configuration on the Electrostatic Charging of Helicopters. In: AIAA Journal : devoted to aerospace research and development, Vol. 56, no. 1, p. 368-375 (2018). doi:10.2514/I.J056242.
2018
Minette, Florent ; Lugo-Pimentel, Michael ; Modroukas, Dean ; Davis, Andrew W. ; Gill, Rajinder ; Castaldi, Marco J. ; De Wilde, Juray. Intrinsic kinetics of steam methane reforming on a thin, nanostructured and adherent Ni coating. In: Applied Catalysis B: Environmental, Vol. 238, p. 184-197 (2018). doi:10.1016/j.apcatb.2018.07.015.
2018
Duponcheel, Matthieu ; Leroi, Caroline ; Zeoli, Stephanie ; Winckelmans, Grégoire ; Bricteux, Laurent ; De Jaeger, Emmanuel ; Chatelain, Philippe. Investigation of the complete power conversion chain for small vertical- and horizontal-axis wind turbines in turbulent winds. In: Journal of Physics: Conference Series, Vol. 1037, no.1037, p. 072046 (2018). doi:10.1088/1742-6596/1037/7/072046.
2018
Ren, Xueping ; Li, Shuxia ; Xiong, Zhiping. Isostatic diffusion bonding and post-solution treatment between Cr22Ni5Mo3MnSi and Cr30Ni7Mo3MnSi duplex stainless steels. In: Journal of Manufacturing Processes, Vol. 34, p. 215-224 (2018). doi:10.1016/j.jmapro.2018.06.010.
2018
Sandu, Georgiana ; Coulombier, Michaël ; Kumar, Vishank ; Kassa, Hailu G. ; Avram, Ionel ; Ye, Ran ; Stopin, Antoine ; Bonifazi, Davide ; Gohy, Jean-François ; Leclère, Philippe ; Gonze, Xavier ; Pardoen, Thomas ; Vlad, Alexandru ; Melinte, Sorin. Kinked silicon nanowires-enabled interweaving electrode configuration for lithium-ion batteries. In: Scientific Reports, Vol. 8, p. 9794 (2018). doi:10.1038/s41598-018-28108-3.
2018
van Sebille, Erik ; Griffies, Stephen M. ; Abernathey, Ryan ; Adams, Thomas P. ; Berloff, Pavel ; Biastoch, Arne ; Blanke, Bruno ; Chassignet, Eric P. ; Cheng, Yu ; Cotter, Colin J. ; Deleersnijder, Eric ; Döös, Kristofer ; Drake, Henri F. ; Drijfhout, Sybren ; Gary, Stefan F. ; Heemink, Arnold W. ; Kjellsson, Joakim ; Koszalka, Inga Monika ; Lange, Michael ; Lique, Camille ; MacGilchrist, Graeme A. ; Marsh, Robert ; Mayorga Adame, C. Gabriela ; McAdam, Ronan ; Nencioli, Francesco ; Paris, Claire B. ; Piggott, Matthew D. ; Polton, Jeff A. ; Rühs, Siren ; Shah, Syed H.A.M. ; Thomas, Matthew D. ; Wang, Jinbo ; Wolfram, Phillip J. ; Zanna, Laure ; Zika, Jan D.. Lagrangian ocean analysis: Fundamentals and practices. In: Ocean Modelling, Vol. 121, p. 49-75 (2018). doi:10.1016/j.ocemod.2017.11.008.
2018
Khoddam, Shahin ; Tian, Liang ; Sapanathan, Thaneshan ; Hodgson, Peter D. ; Zarei-Hanzaki, Abbas. Latest Developments in Modeling and Characterization of Joining Metal Based Hybrid Materials. In: Advanced Engineering Materials, Vol. 20, no. 9, p. 1800048 (2018). doi:10.1002/adem.201800048.
2018
Caprace, Denis-Gabriel ; Chatelain, Philippe ; Winckelmans, Grégoire. Lifting Line with Various Mollifications: Theory and Application to an Elliptical Wing. In: AIAA Journal, Vol. 57, no.1, p. 17-28 (2019). doi:10.2514/1.j057487.
2018
Simar, Aude ; Mertens, Anne ; Ryelandt, Sophie ; Delannay, Francis ; Brassart, Laurence. Mean-field model analysis of deformation and damage in friction stir processed Mg-C composites. In: Materials Science and Engineering: A, Vol. 723, p. 324-333 (2018). doi:10.1016/j.msea.2018.03.043.
2018
Ruiz Salmon, Israel ; Luis Alconero, Patricia. Membrane crystallization via membrane distillation. In: Chemical Engineering and Processing: Process Intensification, Vol. 123, p. 258-271 (2018). doi:10.1016/j.cep.2017.11.017.
2018
Rasouli, R. ; Towhata, I. ; Rattez, Hadrien ; Vonaesch, R.. Mitigation of nonuniform settlement of structures due to seismic liquefaction. In: Journal of Geotechnical and Geoenvironmental Engineering, Vol. 144, no. 11, p. 1-10 (2018). doi:10.1061/(ASCE)GT.1943-5606.0001974.
2018
Delannay, Laurent. Modeling of microscopic strain heterogeneity during wire drawing of pearlite. In: Procedia Manufacturing, Vol. 15, p. 1893-1899 (2018). doi:10.1016/j.promfg.2018.07.199.
2018
Joseph, Adermus ; Gonomy, Nyankona ; Zech, Yves ; Soares Frazao, Sandra. Modelling and analysis of the flood risk at Cavaillon City, Haiti. In: La Houille Blanche, Vol. 2018, no.2, p. 68-75 (2018). doi:10.1051/lhb/2018020.
2018
Grigorev, Petr ; Zinovev, Aleksandr ; Terentyev, Dmitry ; Bonny, Giovanni ; Zhurkin, Evgeny E. ; Van Oost, Guido ; Noterdaeme, Jean-Marie. Molecular dynamics simulation of hydrogen and helium trapping in tungsten. In: Journal of Nuclear Materials, Vol. 508, no.-, p. 451-458 (2018). doi:10.1016/j.jnucmat.2018.05.052.
2018
Rattez, Hadrien ; Stefanou, I. ; Sulem, J. ; Veveakis, M. ; Poulet, T.. Numerical Analysis of Strain Localization in Rocks with Thermo-hydro-mechanical Couplings Using Cosserat Continuum. In: Rock Mechanics and Rock Engineering, Vol. 51, no. 10, p. 3295-3311 (2018). doi:10.1007/s00603-018-1529-7.
2018
de Chaunac, Henri ; Holeyman, Alain. Numerical analysis of the set-up around the shaft of a closed-ended pile driven in clay. In: Géotechnique, Vol. 68, no.4, p. 332-344 (2018). doi:10.1680/jgeot.16.p.229.
2018
Lamberts, Olivier ; Chatelain, Philippe ; Bartosiewicz, Yann. Numerical and experimental evidence of the Fabri-choking in a supersonic ejector. In: International Journal of Heat and Fluid Flow, Vol. 69, p. 194-209 (2018). doi:10.1016/J.IJHEATFLUIDFLOW.2018.01.002.
2018
Jimenez Mena, Norberto ; Jacques, Pascal ; Drezet, Jean-Marie ; Simar, Aude. On the Prediction of Hot Tearing in Al-to-Steel Welding by Friction Melt Bonding. In: Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, Vol. 49, no. 7, p. 2692-2704 (2018). doi:10.1007/s11661-018-4618-z.
2018
Wu, K. ; Contino, Francesco ; Yao, W. ; Fan, X.. On the application of tabulated dynamic adaptive chemistry in ethylene-fueled supersonic combustion. In: Combustion and Flame, Vol. 197, p. 265-275 (2018). doi:10.1016/j.combustflame.2018.08.012.
2018
van der Rest, Camille ; Schmitz, Alain ; Jacques, Pascal. On the characterisation of antisite defects and ordering in off-stoichiometric Fe 2 VAl-based Heusler compounds by X-ray anomalous diffraction. In: Acta Materialia, Vol. 142, p. 193-200 (2018). doi:10.1016/j.actamat.2017.09.024.
2018
Marot, Célestin ; Pellerin, Jeanne ; Remacle, Jean‐François. One machine, one minute, three billion tetrahedra. In: International Journal for Numerical Methods in Engineering, Vol. 117, no.9, p. 967-990 (2019). doi:10.1002/nme.5987.
2018
Duisit, Jérôme ; Amiel, Hadrien ; Wüthrich, Tsering ; Taddeo, Adriano ; Dedriche, Adeline ; Destoop, Vincent ; Pardoen, Thomas ; Bouzin, Caroline ; Joris, Virginie ; Magee, Derek ; Vögelin, Esther ; Harriman, David ; Dessy, Chantal ; Orlando, Giuseppe ; Behets Wydemans, Catherine ; Rieben, Robert ; Gianello, Pierre ; Lengelé, Benoît. Perfusion-decellularization of human ear grafts enables ECM-based scaffolds for auricular vascularized composite tissue engineering.. In: Acta Biomaterialia, Vol. 73, p. 339-354 (2018). doi:10.1016/j.actbio.2018.04.009.
2018
Terentyev, D. ; Riesch, J. ; Lebediev, S. ; Khvan, T. ; Zinovev, Aleksandr ; Rasiński, M. ; Dubinko, A. ; Coenen, J.W.. Plastic deformation of recrystallized tungsten-potassium wires: Constitutive deformation law in the temperature range 22–600 °C. In: International Journal of Refractory Metals and Hard Materials, Vol. 73, no., p. 38-45 (2018). doi:10.1016/j.ijrmhm.2018.01.012.
2018
van Steenberghe, Mathieu ; Schubert, Thomas ; Gerelli, Sébastien ; Bouzin, Caroline ; Guiot, Yves ; Xhema, Daela ; Bollen, Xavier ; Abdelhamid, Karim ; Gianello, Pierre. Porcine pulmonary valve decellularization with NaOH-based vs detergent process: preliminary in vitro and in vivo assessments.. In: Journal of Cardiothoracic Surgery, Vol. 13, no. 1, p. 34 [1-12] (2018). doi:10.1186/s13019-018-0720-y.
2018
Dias, Véronique ; Pochet, Maxime ; Limpens, Gauthier ; Giorgetti Simone ; De Paepe Ward ; Bram Svend ; Bricteux Laurent ; Verhelst Sebastian ; Parente Alessandro ; Contino Francesco ; Jeanmart, Hervé. Position Paper on Energy Transition. In: The Energy Industry Times, (2018).
2018
Tipler, S. ; Parente, A. ; Coussement, A. ; Contino, Francesco ; Symoens, S.H. ; Djokic, M.R. ; Van Geem, K.M.. Prediction of the PIONA and oxygenate composition of unconventional fuels with the Pseudo-Component Property Estimation (PCPE) method. Application to an Automotive Shredder Residues-derived gasoline. In: 2018 SAE World Congress Experience, WCX 2018, Vol. 2018-April (2018). doi:10.4271/2018-01-0905.
2018
Lopez-Covaleda, Edwin ; Ghodrat, Sepideh ; Kestens, Leo ; Sacre, Charles-Henry ; Pardoen, Thomas. Proposal of Characterization Procedure of Metal–Graphite Interface Strength in Compacted Graphite Iron. In: Materials, Vol. 11, no.7, p. 1159 (2018). doi:10.3390/ma11071159.
2018
Hannard, Florent ; Simar, Aude ; Maire, Eric ; Pardoen, Thomas. Quantitative assessment of the impact of second phase particle arrangement on damage and fracture anisotropy. In: Acta Materialia, Vol. 148, p. 456-466 (2018). doi:10.1016/j.actamat.2018.02.003.
2018
Guzzinati, Giulio ; Altantzis, Thomas ; Batuk, Maria ; De Backer, Annick ; Lumbeeck, Gunnar ; Samaee, Vahid ; Batuk, Dmitry ; Idrissi, Hosni ; Hadermann, Joke ; Van Aert, Sandra ; Schryvers, Dominique ; Verbeeck, Johan ; Bals, Sara. Recent Advances in Transmission Electron Microscopy for Materials Science at the EMAT Lab of the University of Antwerp. In: Materials, Vol. 11, no.8, p. 1304 (2018). doi:10.3390/ma11081304.
2018
Miotti Bettanini, Alvise ; Hannard, Florent ; Jacques, Pascal ; Pardoen, Thomas ; Guilleume, Badinier ; Mithieux, Jean Denis ; Delannay, Laurent. Residual ferrite in martensitic stainless steels: the effect of mechanical strength contrast on ductility. In: Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, Vol. 731, p. 495 - 505 (2018). doi:10.1016/j.msea.2018.06.012.
2018
Sironval, Violaine ; Ryelandt, Laurence ; Chaurand, Perrine ; Ibouraadaten, Saloua ; Palmai-Pallag, Mihaly ; Yakoub, Yousof ; Ucakar, Bernard ; Rose, Jérôme ; Poleunis, Claude ; Vanbever, Rita ; Marbaix, Etienne ; Lison, Dominique ; Van Den Brûle, Sybille. Respiratory hazard of Li-ion battery components: elective toxicity of lithium cobalt oxide (LiCoO2) particles in a mouse bioassay. In: Archives of Toxicology, Vol. 92, no. 5, p. 1673-1684 (2018). doi:10.1007/s00204-018-2188-x.
2018
Carlos Blandon ; Carlos Arteta ; Ricardo Bonett ; Julian Carrillo ; Saraiva Esteves Pacheco De Almeida, João. Response of thin lightly-reinforced concrete walls under cyclic loading. In: Engineering Structures, Vol. 176, no. 1, p. 175-187 (2018). doi:10.1016/j.engstruct.2018.08.089.
2018
Huang, Meng ; Xu, Chao ; Fan, Guohua ; Maawad, Emad ; Gan, Weimin ; Geng, Lin ; Lin, Fengxiang ; Tang, Guangze ; Wu, Hao ; Du, Yan ; Li, Danyang ; Miao, Kesong ; Zhang, Tongtong ; Yang, Xuesong ; Xia, Yiping ; Cao, Guojian ; Kang, Huijun ; Wang, Tongmin ; Xiao, Tiqiao ; Xie, Honglan. Role of layered structure in ductility improvement of layered Ti-Al metal composite. In: Acta Materialia, Vol. 153, no.153, p. 235-249 (2018). doi:10.1016/j.actamat.2018.05.005.
2018
Poddar, Shashi ; Pereira de Sa, Pedro Miguel ; Cai, Ronggang ; Delannay, Laurent ; Nysten, Bernard ; Piraux, Luc ; Jonas, Alain M.. Room-Temperature Magnetic Switching of the Electric Polarization in Ferroelectric Nanopillars. In: ACS Nano, Vol. 12, p. 576-584 (2018). doi:10.1021/acsnano.7b07389.
2018
Lipková, Jana ; Arampatzis, Georgios ; Chatelain, Philippe ; Menze, Bjoern ; Koumoutsakos, Petros. S-Leaping: an adaptive, accelerated stochastic simulation algorithm, bridging τ-leaping and R-leaping $$\tau $$ τ -Leaping and R-Leaping. In: Bulletin of Mathematical Biology, Vol. 81, no.8, p. 3074-3096 (2018). doi:10.1007/s11538-018-0464-9.
2018
Salmón, I. Ruiz ; Simon, K. ; Clérin, C. ; Luis Alconero, Patricia. Salt Recovery from Wastewater Using Membrane Distillation–Crystallization. In: Crystal Growth & Design, Vol. 18, no. 12, p. 7275-7285 (2018). doi:10.1021/acs.cgd.8b00580.
2018
Kerckhofs, Greet ; Stegen, Steve ; van Gastel, Nick ; Sap, Annelies ; Falgayrac, Guillaume ; Penel, Guillaume ; Durand, Marjorie ; Luyten, Frank ; Geris, Liesbet ; Vandamme, Katleen ; Parac-Vogt, Tatjana ; Carmeliet, Geert. Simultaneous three-dimensional visualization of mineralized and soft skeletal tissues by a novel microCT contrast agent with polyoxometalate structure. In: Biomaterials, Vol. 159, no.-, p. 1-12 (2018). doi:10.1016/j.biomaterials.2017.12.016.
2018
Li, Wenqi ; Francesco Galiano ; Julien Estager ; Jean-Christophe Monbaliu ; Debecker, Damien P. ; Alberto Figoli ; Luis Alconero, Patricia. Sorption and pervaporation study of methanol/dimethyl carbonate mixture with poly(etheretherketone) (PEEK-WC) membrane. In: Journal of Membrane Science, Vol. 567, p. 303-310 (2018). doi:10.1016/j.memsci.2018.09.040.
2018
Abraham, S. ; Tsirikoglou, P. ; Miranda, J. ; Lacor, C. ; Contino, Francesco ; Ghorbaniasl, G.. Spectral representation of stochastic field data using sparse polynomial chaos expansions. In: Journal of Computational Physics: X, Vol. 367, p. 109-120 (2018). doi:10.1016/j.jcp.2018.04.025.
2018
Ratan, Sanjiv ; De Wilde, Juray. Structured catalyst for steam reforming. A catalyst system for steam methane reforming for improved heat transfer, pressure drop and catalyst effectiveness. In: ePTQ.COM, Vol. Q3, p. 111-113 (2018).
2018
Yin, Chao ; Terentyev, Dmitry ; Pardoen, Thomas ; Bakaeva, Anastasiia ; Petrov, Roumen ; Antusch, Steffen ; Rieth, Michael ; Vilémová, Monika ; Matějíček, Jiří ; Zhang, Tao. Tensile properties of baseline and advanced tungsten grades for fusion applications. In: International Journal of Refractory Metals and Hard Materials, Vol. 75, p. 153-162 (2018). doi:10.1016/j.ijrmhm.2018.04.003.
2018
Lamberts, Olivier ; Chatelain, Philippe ; Bourgeois, Nicolas ; Bartosiewicz, Yann. The compound-choking theory as an explanation of the entrainment limitation in supersonic ejectors. In: Energy, Vol. 158, p. 524-536 (2018). doi:10.1016/j.energy.2018.06.036.
2018
Beekman, Kerensa M. ; Veldhuis-Vlug, Annegreet G. ; van der Veen, Albert ; den Heijer, Martin ; Maas, Mario ; Kerckhofs, Greet ; Parac-Vogt, Tatjana N. ; Bisschop, Peter H ; Bravenboer, Nathalie. The effect of PPARγ inhibition on bone marrow adipose tissue and bone in C3H/HeJ mice.. In: American Journal of Physiology-Endocrinology and Metabolism, Vol. 316, no. 1, p. E96-E105 (2019). doi:10.1152/ajpendo.00265.2018.
2018
Marin, Carlos ; Luyten, Frank ; Van Der Schueren, Bart ; Kerckhofs, Greet ; Vandamme, Katleen. The impact of type 2 diabetes on bone fracture healing. In: Frontiers in Endocrinology, Vol. 9, no. 6 (2018). doi:10.3389/fendo.2018.00006.
2018
Rattez, Hadrien ; Stefanou, I. ; Sulem, J.. The importance of Thermo-Hydro-Mechanical couplings and microstructure to strain localization in 3D continua with application to seismic faults. Part I: Theory and linear stability analysis. In: Journal of the Mechanics and Physics of Solids, Vol. 115, no.-, p. 54-76 (2018). doi:10.1016/j.jmps.2018.03.004.
2018
Rattez, Hadrien ; Stefanou, I. ; Sulem, J. ; Veveakis, M. ; Poulet, T.. The importance of Thermo-Hydro-Mechanical couplings and microstructure to strain localization in 3D continua with application to seismic faults. Part II: Numerical implementation and post-bifurcation analysis. In: Journal of the Mechanics and Physics of Solids, Vol. 115, p. 1-29 (2018). doi:10.1016/j.jmps.2018.03.003.
2018
Pellerin, Jeanne ; Verhetsel, Kilian ; Remacle, Jean-François. There are 174 subdivisions of the hexahedron into tetrahedra. In: ACM Transactions on Graphics, Vol. 37, no. 6 (2018) (2018). doi:10.1145/3272127.3275037.
2018
Monsorno, Davide ; Dimas, Athanassios ; Papalexandris, Miltiadis. Time-accurate calculation of two-phase granular flows exhibiting compaction, dilatancy and nonlinear rheology. In: Journal of Computational Physics, Vol. 372, p. 799-822 (2018). doi:10.1016/j.jcp.2018.06.061.
2018
Heins, Sophie ; Flynn, Louis ; Geeroms, Joost ; Lefeber, Dirk ; Ronsse, Renaud. Torque control of an active elastic transfemoral prosthesis via quasi-static modelling. In: Robotics and Autonomous Systems, Vol. 107, p. 100-115 (2018). doi:10.1016/j.robot.2018.05.015.
2018
De Paepe, W. ; Carrero, M.M. ; Bram, S. ; Parente, A. ; Contino, Francesco. Toward higher micro gas turbine efficiency and flexibility-humidified micro gas turbines: A review. In: Journal of Engineering for Gas Turbines and Power, Vol. 140, no.8 (2018). doi:10.1115/1.4038365.
2018
Delannay, Francis ; Brassart, Laurence. Transient and asymptotic kinetics of mass transfer by coupled surface and grain boundary diffusion in sintering under strain rate control. In: Proceedings of the Royal Society A: Mathematical, Physical and Engineering Science, Vol. 474, no.2217, p. 20180104 (2018). doi:10.1098/rspa.2018.0104.
2018
Lin, Fengxiang ; Marteleur, Matthieu ; Jacques, Pascal ; Delannay, Laurent. Transmission of {332}<113> twins across grain boundaries in a metastable beta-titanium alloy. In: International Journal of Plasticity, Vol. 105, p. 195-210 (2018). doi:10.1016/j.ijplas.2018.02.012.
2018
Li, Yanfang ; Wolanski, Eric ; Dai, Zhenfei ; Lambrechts, Jonathan ; Tang, Cheng ; Zhang, Hua. Trapping of plastics in semi-enclosed seas: Insights from the Bohai Sea, China. In: Marine Pollution Bulletin, Vol. 137, p. 509-517 (2018). doi:10.1016/j.marpolbul.2018.10.038.
2018
Schrooyen, Pierre ; Turchi, Alessandro ; Hillewaert, Koen ; Chatelain, Philippe ; Magin, Thierry E.. Two-way coupled simulations of stagnation-point ablation with transient material response. In: International Journal of Thermal Sciences, Vol. 134, p. 639-652 (2018). doi:10.1016/j.ijthermalsci.2018.08.014.
2018
Ricks, N. ; Abraham, S. ; Contino, Francesco ; Ghorbaniasl, G.. Uncertainty quantification for the aeroacoustics of rotating blades in the time domain. In: Applied Accoustic, Vol. 139, p. 57-68 (2018). doi:10.1016/j.apacoust.2018.04.012.
2018
Li, Wenqi ; Luis Alconero, Patricia. Understanding coupling effects in pervaporation of multi-component mixtures. In: Separation and Purification Technology, Vol. 197, no. 1, p. 95-106 (2018). doi:10.1016/j.seppur.2017.12.041.
2018
Marin, Carlos ; Papantonakis, Georgios ; Sels, Kathleen ; van Lenthe, G Harry ; Falgayrac, Guillaume ; Vangoitsenhoven, Roman ; Van der Schueren, Bart ; Penel, Guillaume ; Luyten, Frank ; Vandamme, Katleen ; Kerckhofs, Greet. Unraveling the compromised biomechanical performance of type 2 diabetes- and Roux-en-Y gastric bypass bone by linking mechanical-structural and physico-chemical properties.. In: Scientific Reports, Vol. 8, no.1, p. 5881 (2018). doi:10.1038/s41598-018-24229-x.
2018
Chevalier, Jérémy ; Brassart, Laurence ; Lani, Frédéric ; Bailly, Christian ; Pardoen, Thomas ; Morelle, Xavier. Unveiling the nanoscale heterogeneity controlled deformation of thermosets. In: Journal of the Mechanics and Physics of Solids, Vol. 121, no.1, p. 432-446 (2018). doi:10.1016/j.jmps.2018.08.014.
2018
Dadi, D. ; Beyene, A. ; Simoens, K. ; Soares, J. ; Demeke, M. M. ; Thevelein, J. M. ; Bernaerts, K. ; Luis Alconero, Patricia ; Van der Bruggen, B.. Valorization of coffee byproducts for bioethanol production using lignocellulosic yeast fermentation and pervaporation. In: International Journal of Environmental Science and Technology, Vol. 15, p. 821-832 (2018). doi:10.1007/s13762-017-1440-x.
2018
Schlaefer, Jodie A. ; Wolanski, Eric ; Lambrechts, Jonathan ; Kingsford, Michael J.. Wind Conditions on the Great Barrier Reef Influenced the Recruitment of Snapper (Lutjanus carponotatus). In: Frontiers in Marine Science, Vol. 5, no.193, p. 1-20 (2018). doi:10.3389/fmars.2018.00193.
2017
De Wilde, Juray ; Lorant, Christophe ; Descamps, Pierre. 2D modeling and simulation of the flow dynamics, electric field and reactions in a low-temperature, atmospheric-pressure nitrogen plasma sharp-end plate-to-plane configuration and CVD reactor. In: Journal of Physics D: Applied Physics, Vol. 50, no.13, p. 135202 (2017). doi:10.1088/1361-6463/aa5c1d.
2017
Goessens, Sébastien ; de Furstenberg, Tassilo ; Manderlier, Charline ; Mueller, Caitlin ; Latteur, Pierre. A Few Aspects of UAV-based Construction. In: IASS Annual Symposium 2017 “Interfaces: architecture . engineering . science” - Hamburg, Germany, (2017).
2017
Vallaeys, Valentin ; Tyson, Rebecca C. ; Lane, W. David ; Deleersnijder, Eric ; Hanert, Emmanuel. A Lévy-flight diffusion model to predict transgenic pollen dispersal. In: Journal of the Royal Society Interface, Vol. 14, no.126, p. 20160889 (2017). doi:10.1098/rsif.2016.0889.
2017
Latteur, Pierre ; Feron, Jonas ; Denoël, Vincent. A design methodology for lattice and tensegrity structures based on a stiffness and volume optimization algorithm using morphological indicators. In: International Journal of Space Structures, Vol. 32, no.Issue 3-4, p. 226-243. doi:10.1177/0266351117746267.
2017
Tsirikoglou, P. ; Abraham, S. ; Contino, Francesco ; Lacor, C. ; Ghorbaniasl, G.. A hyperparameters selection technique for support vector regression models. In: Applied Soft Computing, Vol. 61, p. 139-148 (2017). doi:10.1016/j.asoc.2017.07.017.
2017
Grosshans, Holger ; Papalexandris, Miltiadis. A model for the non-uniform contact charging of particles. In: Powder Technology, Vol. 305, p. 518-527. doi:10.1016/j.powtec.2016.10.024.
2017
Abraham, Simon ; Raisee, Mehrdad ; Ghorbaniasl, Ghader ; Contino, Francesco ; Lacor, Chris. A robust and efficient stepwise regression method for building sparse polynomial chaos expansions. In: Journal of Computational Physics, Vol. 332, p. 461-474 (2017). doi:10.1016/j.jcp.2016.12.015.
2017
Remacle, J.-F.. A two-level multithreaded Delaunay kernel. In: CAD Computer Aided Design, Vol. 85, p. 2-9 (2017). doi:10.1016/j.cad.2016.07.018.
2017
Hammad, Mohamed ; Adjizian, Jean Joseph ; Sacré, Charles-Henri ; Huet, Benjamin ; Charlier, Jean-Christophe ; Raskin, Jean-Pierre ; Pardoen, Thomas. Adhesionless and near-ideal contact behavior of graphene on Cu thin film. In: Carbon, Vol. 122, p. 446-450 (2017). doi:10.1016/j.carbon.2017.06.037.
2017
Pochet, Maxime ; Truedsson, Ida ; Foucher, Fabrice ; Jeanmart, Hervé ; Contino, Francesco. Ammonia-Hydrogen Blends in Homogeneous-Charge Compression-Ignition Engine. In: SAE Technical Papers, Vol. 24, no.0087, p. 1-10 (04/09/2017). doi:10.4271/2017-24-0087.
2017
Tavakoli, Ehsan. An accurate pressure–velocity decoupling technique for semi-implicit rotational projection methods. In: International Journal for Numerical Methods in Fluids, Vol. 84, no.5, p. 241-267 (2016). doi:10.1002/fld.4347 (Soumis).
2017
Gillis, Thomas ; Winckelmans, Grégoire ; Chatelain, Philippe. An efficient iterative penalization method using recycled Krylov subspaces and its application to impulsively started flows. In: Journal of Computational Physics, Vol. 347, no./, p. 490-505 (2017). doi:10.1016/j.jcp.2017.07.015.
2017
Yan, Tingfang ; Parri, Andrea ; Ruiz Garate, Virginia ; Cempini, Marco ; Ronsse, Renaud ; Vitiello, Nicola. An oscillator-based smooth real-time estimate of gait phase for wearable robotics. In: Autonomous Robots, Vol. 41, no. 3, p. 759–774 (2017). doi:10.1007/s10514-016-9566-0.
2017
Frère, Ariane ; Carton de Wiart, Corentin ; Hillewaert, Koen ; Chatelain, Philippe ; Winckelmans, Grégoire. Application of wall-models to discontinuous Galerkin LES. In: Physics of Fluids, Vol. 29, no. 8, p. #085111 (2017). doi:10.1063/1.4998977.
2017
Dehem, Stéphanie ; Gilliaux, Maxime ; Lejeune, Thierry ; Detrembleur, Christine ; Galinski, Daniel ; Sapin, Julien ; Vanderwegen, Martin ; Stoquart, Gaëtan. Assessment of upper limb spasticity in stroke patients using the robotic device REAplan. In: Journal of Rehabilitation Medicine, Vol. 49, no. 7, p. 565–571 (2017). doi:10.2340/16501977-2248.
2017
Tarquini, Danilo ; Saraiva Esteves Pacheco De Almeida, João ; Beyer, Katrin. Axially equilibrated displacement-based beam element for simulating the cyclic inelastic behaviour of RC members : Axially Equilibrated Displacement-based Element for RC Members. In: Earthquake Engineering & Structural Dynamics, Vol. 46, no. 9, p. 1471-1492 (2017). doi:10.1002/eqe.2865.
2017
De Lorenzo, Marco ; Lafon, Philippe ; Seynhaeve, Jean-Marie ; Bartosiewicz, Yann. Benchmark of Delayed Equilibrium Model (DEM) and Classic Two-Phase Critical Flow Models against Experimental Data. In: International Journal of Multiphase Flow, Vol. 92, p. 112-130 (June 2017). doi:10.1016/j.ijmultiphaseflow.2017.03.004.
2017
Bourgeois, Nicolas ; Goldsboroug, S. Scott ; Vanhove, Guillaume ; Duponcheel, Matthieu ; Jeanmart, Hervé ; Contino, Francesco. CFD simulations of Rapid Compression Machines using detailed chemistry: Impact of multi-dimensional effects on the auto-ignition of the iso-octane. In: Combustion Institute. Proceedings, Vol. 36, no. 3, p. 383-391 (2017). doi:10.1016/j.proci.2016.08.064.
2017
Giorgetti, S. ; Bricteux, Laurent ; Parente, A. ; Blondeau, Julien ; Contino, Francesco ; De Paepe, W.. Carbon capture on micro gas turbine cycles: Assessment of the performance on dry and wet operations. In: Applied Energy, Vol. 207, p. 243-253 (2017). doi:10.1016/j.apenergy.2017.06.090.
2017
Verma, Vikrant ; Li, Tingwen ; De Wilde, Juray. Coarse-grained discrete particle simulations of particle segregation in rotating fluidized beds in vortex chambers. In: Powder Technology, Vol. 318, p. 282-292 (2017). doi:10.1016/j.powtec.2017.05.037.
2017
Van Beneden, Maxence ; Kluyskens, Virginie ; Dehez, Bruno. Comparison between optimized topologies of permanent magnet thrust bearings with back-iron. In: Mechanical Engineering Journal, Vol. 4, no. 5, p. 17-00061-17-00061 (2017). doi:10.1299/mej.17-00061.
2017
Sathyan, Sabin ; Belahcen, Anouar ; Kataja, Juhani ; Henrotte, François ; Benabou, Abdelkader ; Le Menach, Yvonnick. Computation of Magnetic Forces Using Degenerated Airgap Element. In: IEEE Transactions on Magnetics, no. 99, p. 1-1 (2017). doi:10.1109/TMAG.2017.2656239.
2017
Manhas, Varun ; Guyot, Yann ; Kerckhofs, Greet ; Chai, Yoke Chin ; Geris, Liesbet. Computational modelling of local calcium ions release from calcium phosphate-based scaffolds. In: Biomechanics and Modeling in Mechanobiology, Vol. 16, no.2, p. 425-438 (2017). doi:10.1007/s10237-016-0827-9.
2017
Grosshans, Holger ; Cao, Le ; Fuchs, Laszlo ; Szász, Robert-Zoltán. Computational sensitivity study of spray dispersion and mixing on the fuel properties in a gas turbine combustor. In: Fluid Dynamics Research, Vol. 49, no.2, p. 025506 (2017). doi:10.1088/1873-7005/49/2/025506.
2017
Zinovev, Aleksandr ; Terentyev, Dmitry ; Dubinko, Andrii ; Delannay, Laurent. Constitutive law for thermally-activated plasticity of recrystallized tungsten. In: Journal of Nuclear Materials, Vol. 496, p. 325-332 (2017). doi:10.1016/j.jnucmat.2017.09.044.
2017
Mosala Nezhad, Zahra ; Poncelet, Alain ; de Kerchove, Laurent ; Fervaille, Caroline ; Banse, Xavier ; Bollen, Xavier ; Dehoux, Jean-Paul ; El Khoury, Gebrine ; Gianello, Pierre. CorMatrix valved conduit in a porcine model: long-term remodelling and biomechanical characterization.. In: Interactive Cardiovascular and Thoracic Surgery, Vol. 24, no. 1, p. 90-98 (2017). doi:10.1093/icvts/ivw314.
2017
Lapouge, Pierre ; Onimus, F. ; Coulombier, Michaël ; Raskin, Jean-Pierre ; Pardoen, Thomas. Creep behavior of submicron copper films under irradiation. In: Acta Materialia, Vol. 131, p. 77-87 (2017). doi:10.1016/j.actamat.2017.03.056.
2017
Holeyman, Alain ; Whenham, Valérie. Critical Review of the Hypervib1 Model to Assess Pile Vibro-Drivability. In: Geotechnical and Geological Engineering : an international journal, Vol. 2017, no.2, p. 1-19 (21 March 2017). doi:10.1007/s10706-017-0218-8.
2017
Zinovev, Aleksandr ; Bapanina, M. G. ; Babicheva, R. I. ; Enikeev, N. A. ; Dmitriev, S. V. ; Zhou, K.. Deformation of nanocrystalline binary aluminum alloys with segregation of Mg, Co and Ti at grain boundaries. In: Physics of Metals and Metallography, Vol. 118, no.1, p. 65-74 (2017). doi:10.1134/s0031918x16110144.
2017
Kluyskens, Virginie ; Dumont de Chassart, Corentin ; Dehez, Bruno. Description of an Electrodynamic Self-Bearing Permanent Magnet Machine. In: IEEE Transactions on Magnetics, Vol. 53, no. 1, p. 8100409 (2017). doi:10.1109/TMAG.2016.2615598.
2017
Kuci, Erin ; Henrotte, François ; Duysinx, Pierre ; Geuzaine, Christophe. Design sensitivity analysis for shape optimization based on the Lie derivative. In: Computer Methods in Applied Mechanics and Engineering, Vol. 317, p. 702-722 (2017). doi:10.1016/j.cma.2016.12.036.
2017
Grosshans, Holger ; Papalexandris, Miltiadis. Direct numerical simulation of triboelectric charging in particle-laden turbulent channel flows. In: Journal of Fluid Mechanics, Vol. 818, p. 465-491 (2017). doi:10.1017/jfm.2017.157.
2017
Montero Carrero, M. ; De Paepe, W. ; Bram, S. ; Parente, A. ; Contino, Francesco. Does humidification improve the micro Gas Turbine cycle? Thermodynamic assessment based on Sankey and Grassmann diagrams. In: Applied Energy, Vol. 204, p. 1163-1171 (2017). doi:10.1016/j.apenergy.2017.05.067.
2017
Hannard, Florent ; Castin, Sidney ; Maire, Eric ; Mokso, Rajmund ; Pardoen, Thomas ; Simar, Aude. Ductilization of aluminium alloy 6056 by friction stir processing. In: Acta Materialia, Vol. 130, p. 121-136 (2017). doi:10.1016/j.actamat.2017.01.047.
2017
David Lukumu Bampole ; Luis Alconero, Patricia ; Emmanuel Lukumu Mulamba. Effect of Substrates During the Adaptation of Indigenous Bacteria in Bioleaching of Sulphide Ores. In: American Scientific Research Journal for Engineering, Technology, and Sciences, Vol. 32, no.1, p. 200-214 (2017).
2017
Zhang, Z ; Zhao, S ; Rezakazemi, M ; Chen, F ; Luis Alconero, Patricia ; van der Bruggen, B. Effect of flow and module configuration on SO absorption by using membrane contactors. In: Global Nest Journal, Vol. 19, no. 4, p. 716-725 (2017).
2017
Dubinko, A. ; Terentyev, D. ; Bakaeva, A. ; Pardoen, Thomas ; Zibrov, M. ; Morgan, T.W.. Effect of high flux plasma exposure on the micro-structural and -mechanical properties of ITER specification tungsten. In: Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, Vol. 393, p. 155-159 (2017). doi:10.1016/j.nimb.2016.10.041.
2017
Sacre, Charles-Henry ; Lani, F. ; Guaino, Ph. ; Libralesso, L. ; Favache, Audrey ; Pardoen, Thomas. Effect of polymer interlayer on scratch resistance of hard film: Experiments and finite element modeling. In: Wear, Vol. 378-379, p. 136-144 (2017). doi:10.1016/j.wear.2017.02.033.
2017
Delroisse, Pauline ; Jacques, Pascal ; Maire, Eric ; Rigo, Olivier ; Simar, Aude. Effect of strut orientation on the microstructure heterogeneities in AlSi10Mg lattices processed by selective laser melting. In: Scripta Materialia, Vol. 141, p. 32-35 (2017). doi:10.1016/j.scriptamat.2017.07.020.
2017
De Camillis, Michela ; Di Emidio, Gemmina ; Bezuijen, Adam ; Verástegui Flores, Ramiro Daniel ; Van Stappen, Jeroen ; Cnudde, Veerle. Effect of wet-dry cycles on polymer treated bentonite in seawater: swelling ability, hydraulic conductivity and crack analysis. In: Applied Clay Science, (2016). doi:10.1016/j.clay.2016.11.011 (Accepté/Sous presse).
2017
Steentjes, Simon ; Henrotte, François ; Hameyer, Kay. Energy-based ferromagnetic material model with magnetic anisotropy. In: Journal of Magnetism and Magnetic Materials, Vol. 425, p. 20-24 (2017). doi:10.1016/j.jmmm.2016.10.085.
2017
Delvaux, Adeline ; Van Overmeere, Quentin ; Poulain, Raphaël ; Proost, Joris. Enhanced Oxygen Evolution during Water Electrolysis at De-Alloyed Nickel Thin Film Electrodes. In: Journal of the Electrochemical Society, Vol. 164, no. 12, p. F1196-F1203 (2017). doi:10.1149/2.1451712jes.
2017
van Steenberghe, Mathieu ; Schubert, Thomas ; Guiot , Yves ; Bouzin, Caroline ; Bollen, Xavier ; Gianello, Pierre. Enhanced vascular biocompatibility of decellularized xeno-/allogeneic matrices in a rodent model.. In: Cell and Tissue Banking, Vol. 18, no. 2, p. 249-262 (2017). doi:10.1007/s10561-017-9610-0.
2017
Dumont de Chassart, Corentin ; Gilson, Adrien ; Kluyskens, Virginie ; Espanet, Christophe ; Dehez, Bruno. Evaluation of the electrodynamic forces in high-speed permanent magnet machines with rotor eccentricity. In: Mechanical Engineering Journal, [Advance publication], Vol. 4, no.5, p. 17-000072 (2017). doi:10.1299/mej.17-00072.
2017
Ruiz Garate, Virginia ; Parri, Andrea ; Yan, Tingfang ; Munih, Marko ; Molino Lova, Raffaele ; Vitiello, Nicola ; Ronsse, Renaud. Experimental Validation of Motor Primitive-Based Control for Leg Exoskeletons during Continuous Multi-Locomotion Tasks. In: Frontiers in Neurorobotics, Vol. 11, p. 15 (2017). doi:10.3389/fnbot.2017.00015.
2017
Juez, C. ; Soares Frazao, Sandra ; Murillo, J. ; García-Navarro, P.. Experimental and numerical simulation of bed load transport over steep slopes. In: Journal of Hydraulic Research, Vol. 55, no.4, p. 455-469 (2017). doi:10.1080/00221686.2017.1288417.
2017
Montero Carrero, M. ; De Paepe, W. ; Magnusson, J. ; Parente, A. ; Bram, S. ; Contino, Francesco. Experimental characterisation of a micro Humid Air Turbine: assessment of the thermodynamic performance. In: Applied Thermal Engineering, Vol. 118, p. 796-806 (2017). doi:10.1016/j.applthermaleng.2017.03.017.
2017
Weber, Justin M. ; Stehle, Richard C. ; Breault, Ronald W. ; De Wilde, Juray. Experimental study of the application of rotating fluidized beds to particle separation. In: Powder Technology, Vol. 316, p. 123-130 (2017). doi:10.1016/j.powtec.2016.12.076.
2017
Flitti, Abdelhamid ; Della, Noureddine ; Verástegui Flores, Ramiro Daniel. Experimental study of the shear resistance of granular material: influence of initial state. In: Journal of Theoretical and Applied Mechanics, Vol. 55, no.2, p. 523-533 (2017). doi:10.15632/jtam-pl.55.2.523.
2017
Zinovev, Aleksandr ; Terentyev, D ; Delannay, Laurent. Finite element analysis of heat load of tungsten relevant to ITER conditions. In: Physica Scripta : an international journal for experimental and theoretical physics, Vol. T170, p. 014002 (2017). doi:10.1088/0031-8949/2017/T170/014002.
2017
Van Verdeghem, Joachim ; Kluyskens, Virginie ; Dehez, Bruno. Five degrees of freedom linear state-space representation of electrodynamic thrust bearings. In: Journal of Sound and Vibration, Vol. 405, no. 1, p. 48-67 (Sept. 2017). doi:10.1016/j.jsv.2017.05.042.
2017
Dupont, Elise ; Koppelaar, Rembrandt ; Jeanmart, Hervé. Global available wind energy with physical and energy return on investment constraints. In: Applied Energy, Vol. 209, p. 322-338 (2018). doi:10.1016/j.apenergy.2017.09.085.
2017
Bhaduri, Subir ; Berger, Benjamin ; Pochet, Maxime ; Jeanmart, Hervé ; Contino, Francesco. HCCI engine operated with unscrubbed biomass syngas. In: Fuel Processing Technology, Vol. 157, p. 52-58 (2017). doi:10.1016/j.fuproc.2016.10.011.
2017
De Lorenzo, Marco ; Lafon, Philippe ; Di Matteo, Michele ; Pelanti, Marica ; Seynhaeve, Jean-Marie ; Bartosiewicz, Yann. Homogeneous Two-Phase Flow Models and Accurate Steam-Water Table Look-up Method for Fast Transient Simulations. In: International Journal of Multiphase Flow, Vol. 95, p. 199-219 (October 2017). doi:10.1016/j.ijmultiphaseflow.2017.06.001.
2017
Ghidelli, Matteo ; Idrissi, Hosni ; Gravier, Sébastien ; Blandin, Jean-Jacques ; Raskin, Jean-Pierre ; Schryvers, Dominique ; Pardoen, Thomas. Homogeneous flow and size dependent mechanical behavior in highly ductile Zr65Ni35 metallic glass films. In: Acta Materialia, Vol. 131, p. 246-259 (2017). doi:10.1016/j.actamat.2017.03.072.
2017
Dehem, Stéphanie ; Stoquart Gaetan ; Vincenza Montedoro ; Edwards, Martin ; Sophie Heins ; Dehez, Bruno ; Lejeune, Thierry. INNOVATIONS EN MÉDECINE PHYSIQUE ET RÉADAPTATION QUE RETENIR DE 2016 ? . In: Louvain médical, Vol. 136, no.2, p. 99-101 (2017).
2017
Alkorta, Jon ; Marteleur, Matthieu ; Jacques, Pascal. Improved simulation based HR-EBSD procedure using image gradient based DIC techniques. In: Ultramicroscopy, Vol. 182, p. 17-27 (2017). doi:10.1016/j.ultramic.2017.06.015.
2017
Saraiva Esteves Pacheco De Almeida, João ; Prodan, Ovidiu ; Tarquini, Danilo ; Beyer, Katrin. Influence of Lap Splices on the Deformation Capacity of RC Walls. I: Database Assembly, Recent Experimental Data, and Findings for Model Development. In: Journal of Structural Engineering, Vol. 143, no. 12, p. 04017156 (2017). doi:10.1061/(ASCE)ST.1943-541X.0001853.
2017
Tarquini, Danilo ; Saraiva Esteves Pacheco De Almeida, João ; Beyer, Katrin. Influence of Lap Splices on the Deformation Capacity of RC Walls. II: Shell Element Simulation and Equivalent Uniaxial Model. In: Journal of Structural Engineering, Vol. 143, no. 12, p. 04017157 (2017). doi:10.1061/(ASCE)ST.1943-541X.0001859.
2017
Mallmann, Camila ; Simar, Aude ; Ferrié, Emilie ; Fivel, Marc ; Lilleodden, Erica T.. Influence of Y2O3 nanoparticles on the twinning of single crystalline magnesium. In: Scripta Materialia, Vol. 138, p. 79-82 (2017). doi:10.1016/j.scriptamat.2017.05.016.
2017
Miotti Bettanini, Alvise ; Delannay, Laurent ; Jacques, Pascal ; Pardoen, Thomas ; Badinier, Guillaume ; Mithieux, Jean-Denis. Influence of microscopic strain heterogeneity on the formability of martensitic stainless steel. In: AIP Conference Proceedings, Vol. 1896, p. 020010 (2017). doi:10.1063/1.5007967.
2017
Rosales Trujillo, Waldo ; De Wilde, Juray. Influence of solids outlets and the gas inlet design on the generation of a gas-solids rotating fluidized bed in a vortex chamber for different types of particles. In: Chemical Engineering Science, Vol. 173, p. 74-90 (2017). doi:10.1016/j.ces.2017.07.031.
2017
Tuyaerts, Romain ; Poncelet, Olivier ; Raskin, Jean-Pierre ; Proost, Joris. Internal stress and opto-electronic properties of ZnO thin films deposited by reactive sputtering in various oxygen partial pressures. In: Journal of Applied Physics, Vol. 122, no.15, p. 155306 (2017). doi:10.1063/1.4996453.
2017
Abedrabbo Ode, Gabriel ; Cartiaux, Olivier ; Mahaudens, Philippe ; Detrembleur, Christine ; Mousny, Maryline ; Fisette, Paul. Intervertebral efforts quantification using a multibody dynamics approach: application to scoliosis. In: Computer Methods in Biomechanics and Biomedical Engineering, Vol. 20, no. Suppl 1, p. 1-2 (2017). doi:10.1080/10255842.2017.1382831.
2017
Chatelain, Philippe ; Duponcheel, Matthieu ; Zeoli, Stéphanie ; Buffin, Simon ; Caprace, Denis-Gabriel ; Winckelmans, Grégoire ; Bricteux, Laurent. Investigation of the effect of inflow turbulence on vertical axis wind turbine wakes. In: Journal of Physics: Conference Series (Print), Vol. 854, no.1, p. 012011 (2017). doi:10.1088/1742-6596/854/1/012011.
2017
Negawo, Worku Janka ; Di Emidio, Gemmina ; Bezuijen, Adam ; Verástegui Flores, Ramiro Daniel ; François, Bertrand. Lime-stabilisation of high plasticity swelling clay from Ethiopia. In: European Journal of Environmental and Civil Engineering, , p. 1-11 (2017). doi:10.1080/19648189.2017.1304272.
2017
Lin, Fengxiang ; Marteleur, Matthieu ; Alkorta, Jon ; Jacques, Pascal ; Delannay, Laurent. Local stress field induced by twinning in a metastable beta-titanium alloy. In: IOP Conference Series: Materials Science and Engineering, Vol. 219, p. 012031 (2017). doi:10.1088/1757-899X/219/1/012031.
2017
Dehem, Stéphanie ; Stoquart, Gaëtan ; Montedoro, Vincenza ; Edwards, Martin ; Heins, Sophie ; Dehez, Bruno ; Lejeune, Thierry. L’apport de nouvelles technologies dans la rééducation motrice et cognitive des patients cérébro-lésés. In: Louvain médical, Vol. 136, no. 2, p. 99-101 (2017).
2017
Ruiz Salmon, Israel ; Janssens, Raphaël ; Luis Alconero, Patricia. Mass and heat transfer study in osmotic membrane distillationcrystallization for CO2 valorization as sodium carbonate. In: Separation and Purification Technology, Vol. 176, p. 173-183 (2017). doi:10.1016/j.seppur.2016.12.010.
2017
Schwindt, N. ; von Pidoll, U. ; Markus, D. ; Klausmeyer, U. ; Papalexandris, Miltiadis ; Grosshans, Holger. Measurement of electrostatic charging during pneumatic conveying of powders. In: Journal of Loss Prevention in the Process Industries : the international journal of chemical and process plant safety, Vol. 49, no. B, p. 461-471 (2017). doi:10.1016/j.jlp.2017.05.028.
2017
Burmistrov, I. ; Gorshkov, N. ; Ilinykh, I. ; Muratov, D. ; Kolesnikov, E. ; Yakovlev, E. ; Mazov, I. ; Issi, Jean-Paul ; Kuznetsov, D.. Mechanical and electrical properties of ethylene-1-octene and polypropylene composites filled with carbon nanotubes. In: Composites Science and Technology, Vol. 147, p. 71-77 (2017). doi:10.1016/j.compscitech.2017.05.005.
2017
van der Rest, Astrid ; Idrissi, Hosni ; Henry, Frédéric ; Favache, Audrey ; Schryvers, Dominique ; Proost, Joris ; Raskin, Jean-Pierre ; Van Overmeere, Quentin ; Pardoen, Thomas. Mechanical behavior of ultrathin sputter deposited porous amorphous Al2O3 films. In: Acta Materialia, Vol. 125, p. 27-37 (2017). doi:10.1016/j.actamat.2016.11.037.
2017
Morelle, Xavier ; Chevalier, Jérémy ; Bailly, Christian ; Pardoen, Thomas. Mechanical characterization and modeling of the deformation and failure of the highly crosslinked RTM6 epoxy resin. In: Mechanics of Time Dependent Materials, Vol. 21, no. 3, p. 419-454 (2017). doi:10.1007/s11043-016-9336-6.
2017
Grosshans, Holger ; Szász, Robert-Zoltan ; Papalexandris, Miltiadis. Modeling the electrostatic charging of a helicopter during hovering in dusty atmosphere. In: Aerospace Science and Technology, Vol. 64, p. 31-38 (2017). doi:10.1016/j.ast.2017.01.014.
2017
Zobova, Alexandra ; Habra, Timothée ; Van der Noot, Nicolas ; Dallali, Houman ; Tsagarakis, Nikolaos G. ; Fisette, Paul ; Ronsse, Renaud. Multi-physics modelling of a compliant humanoid robot. In: Multibody System Dynamics, Vol. 39, no.1-2, p. 95-114 (2017). doi:10.1007/s11044-016-9545-4.
2017
Lamberts, Olivier ; Chatelain, Philippe ; Bartosiewicz, Yann. New methods for analyzing transport phenomena in supersonic ejectors. In: International Journal of Heat and Fluid Flow, Vol. 64, p. 23-40. doi:10.1016/j.ijheatfluidflow.2017.01.009.
2017
Wucher, B. ; Hallström, S. ; Dumas, D. ; Pardoen, Thomas ; Bailly, Christian ; Martiny, P. ; Lani, F.. Nonconformal mesh-based finite element strategy for 3D textile composites. In: Journal of Composite Materials, Vol. 51, no.16, p. 2315-2330 (2017). doi:10.1177/0021998316669875.
2017
Deleersnijder, Eric ; Delhez, Eric ; Dupont-Gillain, Christine C. ; Hanert, Emmanuel ; Schyns, Michaël ; Wertz, Vincent. Nous voulons croire à la fin de la constante macabre dans nos universités. In: Le Soir.
2017
Nuclear instrumentation and measurement: areview based on the ANIMMA conferences, collab. Giot, Michel ; Vermeeren, Ludo. In: EPJ Nuclear Sciences & Technologies, Vol. 3, p. 49 (2017). doi:10.1051/epjn/2017023.
2017
Grosshans, Holger ; Papalexandris, Miltiadis. Numerical study of the influence of the powder and pipe properties on electrical charging during pneumatic conveying. In: Powder Technology, Vol. 315, p. 227-235 (2017). doi:10.1016/j.powtec.2017.04.012.
2017
Georgiou, Michail ; Papalexandris, Miltiadis. Numerical study of turbulent flow in a rectangular T-junction. In: Physics of Fluids, Vol. 29, no. 6, p. 065106. doi:10.1063/1.4986430.
2017
Grosshans, Holger ; Papalexandris, Miltiadis. On the accuracy of the numerical computation of the electrostatic forces between charged particles. In: Powder Technology, Vol. 322, no.C, p. 185-194 (2017). doi:10.1016/j.powtec.2017.09.023.
2017
Ghorbaniasl, G. ; Ricks, N. ; Siozos-Rousoulis, L. ; Degrez, Ǵ. ; Contino, Francesco. On the refinement of the rotation rate based Smagorinsky model using velocity field gradients. In: Physics of Fluids, Vol. 29, no. 10 (2017) (2017) (2017). doi:10.1063/1.5008764.
2017
Varsakelis, Christos ; Papalexandris, Miltiadis. On the relevance of low-Mach number asymptotics to the thermodynamics of heterogeneous immiscible mixtures. In: Journal of Non-Equilibrium Thermodynamics : thermophysical, chemical and biochemical processes, Vol. 42, no. 1, p. 99-12 (2017). doi:10.1515/jnet-2016-0003.
2017
Varsakelis, Christos ; Papalexandris, Miltiadis. On the well-posedness of the Darcy–Brinkman–Forchheimer equations for coupled porous media-clear fluid flow. In: Nonlinearity, Vol. 30, no.4, p. 1449-1464 (April 2017). doi:10.1088/1361-6544/aa5ecf.
2017
Mercier, Thomas ; Olivier, Mathieu ; De Jaeger, Emmanuel. Operation ranges and dynamic capabilities of variable-speed pumped-storage hydropower. In: Journal of Physics: Conference Series (Print), Vol. 813, p. 012004 (2017). doi:10.1088/1742-6596/813/1/012004.
2017
Van Beneden, Maxence ; Kluyskens, Virginie ; Dehez, Bruno. Optimal sizing and comparison of permanent magnet thrust bearings. In: IEEE Transactions on Magnetics, Vol. 53, no. 2, p. 8300110 (2017). doi:10.1109/TMAG.2016.2625275.
2017
Buckingham, Sophia ; Koloszar, Lilla ; Bartosiewicz, Yann ; Winckelmans, Grégoire. Optimized temperature perturbation method to generate turbulent in ow conditions for LES/DNS simulations. In: Computers & Fluids, Vol. 154, p. 44-59 (1 september 2017). doi:10.1016/j.compfluid.2017.05.015.
2017
Modave, Axel ; Lambrechts, Jonathan ; Geuzaine, Christophe. Perfectly matched layers for convex truncated domains with discontinuous Galerkin time domain simulations. In: Computers & Mathematics with Applications, Vol. 73, no. 4, p. 684-700 (2017). doi:10.1016/j.camwa.2016.12.027.
2017
Dumont de Chassart, Corentin ; Kluyskens, Virginie ; Dehez, Bruno. Performance of Yokeless Heteropolar Electrodynamic Bearings. In: Applied Computational Electromagnetics Society Journal, Vol. 32, no. 8, p. 685-690 (2017).
2017
Monsorno, Davide ; Varsakelis, Christos ; Papalexandris, Miltiadis. Poiseuille flow of dense non-colloidal suspensions: the role of intergranular and nonlocal stresses in particle migration. In: Journal of Non-Newtonian Fluid Mechanics, Vol. 247, no.C, p. 229-238 (2017). doi:10.1016/j.jnnfm.2017.08.002.
2017
Zayoud, Azd ; Mahanta, P. (co-first author) ; Saha, U. K. (co-first author). Pure Oxy-Fuel Circulating Fluidized Bed Combustion by Controlling Adiabatic Flame Temperature Using Fuel Staging. In: Current Science, Vol. 113, no. 08, p. 1560 (2017). doi:10.18520/cs/v113/i08/1560-1567.
2017
Schryvers, D. ; Salje, E.K.H. ; Nishida, M. ; De Backer, A. ; Idrissi, Hosni ; Van Aert, S.. Quantification by aberration corrected (S)TEM of boundaries formed by symmetry breaking phase transformations. In: Ultramicroscopy, Vol. 176, p. 194-199 (2017). doi:10.1016/j.ultramic.2016.12.022.
2017
Samaeeaghmiyoni, Vahid ; Idrissi, Hosni ; Groten, Jonas ; Schwaiger, Ruth ; Schryvers, Dominique. Quantitative in-situ TEM nanotensile testing of single crystal Ni facilitated by a new sample preparation approach. In: Micron, Vol. 94, p. 66-73 (2017). doi:10.1016/j.micron.2016.12.005.
2017
Tran, H-S ; Tummala, Hareesh ; Duchêne,L ; Pardoen, Thomas ; Fivel, Marc ; Habraken, A.-M.. Quasi-Continuum analysis of Dislocation-Coherent Twin Boundary interactions to provide local rules to Discrete Dislocation Dynamics. In: AIP Conference Proceedings, Vol. 1896, no. 1 (2017) (2017).
2017
Long, Nguyen ; Lee, Jintae ; Koo, Kee-Kahb ; Luis Alconero, Patricia ; Lee, Moonyong. Recent Progress and Novel Applications in Enzymatic Conversion of Carbon Dioxide. In: Energies, Vol. 10, no. 12, p. 473 (2017). doi:10.3390/en10040473.
2017
Zhang, Rui-Xin ; Braeken, Leen ; Liu, Tian-Yin ; Luis Alconero, Patricia ; Wang, Xiao-Lin ; Van der Bruggen, Bart. Remarkable Anti-Fouling Performance of TiO2-Modified TFC Membranes with Mussel-Inspired Polydopamine Binding. In: Applied Sciences, Vol. 7, no.1, p. 81 (2017). doi:10.3390/app7010081.
2017
Heins, Sophie ; Dehem, Stéphanie ; Montedoro, Vincenza ; Stoquart, Gaëtan ; Edwards, Martin ; Dehez, Bruno ; Rocca, Francois ; De Deken, Pierre-Henri ; Mancas, Matei ; Lejeune, Thierry. Robotic-assisted serious gamefor motor and cognitive post-stroke rehabilitation. In: Robotic-assisted serious game for motor and cognitive post-stroke rehabilitation, p. 1-8. doi:10.1109/SeGAH.2017.7939262.
2017
Contino, Francesco ; Dagaut, P. ; Halter, F. ; Masurier, J.-B. ; Dayma, G. ; Mounaïm-Rousselle, C. ; Foucher, F.. Screening method for fuels in homogeneous charge compression ignition engines: Application to valeric biofuels. In: Energy and Fuel, Vol. 31, no.1, p. 607-614 (2017). doi:10.1021/acs.energyfuels.6b02300.
2017
Denies, Nicolas ; Holeyman, Alain. Shear strength degradation of vibrated dry sand. In: Soil Dynamics and Earthquake Engineering, Vol. 95, no.2017, p. 106-117 (2017). doi:10.1016/j.soildyn.2017.01.039.
2017
Wucher, B. ; Martiny, Ph. ; Lani, F. ; Pardoen, Thomas ; Bailly, Christian ; Dumas, D.. Simulation-driven mold compensation strategy for composites: Experimental validation on a doubly-curved part. In: Composites Part A: Applied Science and Manufacturing, Vol. 102, p. 96-107 (2017). doi:10.1016/j.compositesa.2017.07.029.
2017
Janssens, Raphaël ; Mandal, Mrinal Kanti ; Dubey, Kashyap Kumar ; Luis Alconero, Patricia. Slurry photocatalytic membrane reactor technology for removal of pharmaceutical compounds from wastewater: Towards cytostatic drug elimination. In: Science of the Total Environment, Vol. 599-600, p. 612-626 (2017). doi:10.1016/j.scitotenv.2017.03.253.
2017
Simar, Aude ; Avettand-Fènoël, Marie-Noëlle. State of the art about dissimilar metal friction stir welding. In: Science and Technology of Welding and Joining (Print), Vol. 22, no. 5, p. 389-403 (2017). doi:10.1080/13621718.2016.1251712.
2017
El Ghezal, Marieme Imene ; Doghri, Issam ; Kondo, Djimédo. Static Limit Analysis and strength of porous solids with Hill orthotropic matrix. In: International Journal of Solids and Structures, Vol. 109, no.0, p. 63-71 (2017). doi:10.1016/j.ijsolstr.2017.01.007.
2017
Velickovic, Mirjana ; Zech, Yves ; Soares Frazao, Sandra. Steady-flow experiments in urban areas and anisotropic porosity model. In: Journal of Hydraulic Research, Vol. 55, no.1, p. 85-100 (2017). doi:10.1080/00221686.2016.1238013.
2017
Sun, F. ; Zhang, J. Y. ; Vermaut, P. ; Choudhuri, D. ; Alam, T. ; Mantri, S. A. ; Svec, P. ; Gloriant, T. ; Jacques, Pascal ; Banerjee, R. ; Prima, F.. Strengthening strategy for a ductile metastableβ-titanium alloy using low-temperature aging. In: Materials Research Letters, Vol. 5, no. 8, p. 547-553 (2017). doi:10.1080/21663831.2017.1350211.
2017
Delandmeter, Philippe ; Lambrechts, Jonathan ; Marmorino, George O. ; Legat, Vincent ; Wolanski, Eric ; Remacle, Jean-Fran?ois ; Chen, Wei ; Deleersnijder, Eric. Submesoscale tidal eddies in the wake of coral islands and reefs: satellite data and numerical modelling. In: Ocean Dynamics : theoretical, computational oceanography and monitoring, Vol. 67, no.7, p. 897-913 (2017). doi:10.1007/s10236-017-1066-z.
2017
Guns, Laura-An ; Monteagudo, Silvia ; Kvasnytsia, Maryna ; Kerckhofs, Greet ; Vandooren, Jennifer ; Opdenakker, Ghislain ; Lories, Rik ; Cailotto, Frederic. Suramin increases cartilage proteoglycan accumulation in vitro and protects against joint damage triggered by papain injection in mouse knees in vivo. In: RMD Open, Vol. 3, no.2, p. e000604 (2017). doi:10.1136/rmdopen-2017-000604.
2017
Bhaduri, Subir Swaraj ; Jeanmart, Hervé ; Contino, Francesco. Tar tolerant HCCI engine fuelled with biomass syngas : combustion control through EGR. In: Energy Procedia, Vol. 105, p. 1764-1770 (2017). doi:10.1016/j.egypro.2017.03.507.
2017
Saraiva Esteves Pacheco De Almeida, João ; Prodan, Ovidiu ; Rosso, Angelica ; Beyer, Katrin. Tests on Thin Reinforced Concrete Walls Subjected to In-Plane and Out-of-Plane Cyclic Loading. In: Earthquake Spectra, Vol. 33, no. 1, p. 323-345 (2017). doi:10.1193/101915EQS154DP.
2017
Wolanski, E. ; Andutta, F. ; Deleersnijder, Eric ; Li, Y. ; Thomas, C.J.. The Gulf of Carpentaria heated Torres Strait and the Northern Great Barrier Reef during the 2016 mass coral bleaching event. In: Estuarine, Coastal and Shelf Science, Vol. 194, p. 172-181 (2017). doi:10.1016/j.ecss.2017.06.018.
2017
Hatami, M.K. ; Pardoen, Thomas ; Lacroix, G. ; Berke, P. ; Jacques, Pascal ; Massart, T.J.. Towards ultra-high ductility TRIP-assisted multiphase steels controlled by strain gradient plasticity effects. In: Journal of the Mechanics and Physics of Solids, Vol. 98, p. 201-221 (2017). doi:10.1016/j.jmps.2016.09.006.
2017
Shah, S.H.A.M. ; Primeau, François ; Deleersnijder, Eric ; Heemink, Arnold. Tracing the ventilation pathways of the Deep North Pacific Ocean using Lagrangian particles and Eulerian tracers. In: Journal of Physical Oceanography, Vol. 47, p. 1261-1280 (2017). doi:10.1175/JPO-D-16-0098.1.
2017
Dupont, Elise ; Fagnart, Jean-François ; Germain, Marc ; Jeanmart, Hervé ; Possoz, Louis. Transition énergétique et (dé)croissance économique. In: Regards Economiques, Vol. Novembre 2017, no. 135, p. 1-26 (2017).
2017
Georgiou, Michail ; Papalexandris, Miltiadis. Turbulent mixing in T-junctions: The role of the temperature as an active scalar. In: International Journal of Heat and Mass Transfer, Vol. 115, no.B, p. 793-809 (12/2017). doi:10.1016/j.ijheatmasstransfer.2017.08.081.
2017
Chatelain, Philippe ; Duponcheel, Matthieu ; Caprace, Denis-Gabriel ; Marichal, Yves ; Winckelmans, Grégoire. Vortex particle-mesh simulations of vertical axis wind turbine flows: from the airfoil performance to the very far wake. In: Wind Energy Science, Vol. 2, no. 1, p. 317-328 (2017). doi:10.5194/wes-2-317-2017.
2017
De Paepe, W. ; Montero Carrero, M. ; Bram, S. ; Contino, Francesco ; Parente, A.. Waste heat recovery optimization in micro gas turbine applications using advanced humidified gas turbine cycle concepts. In: Applied Energy, Vol. 207, p. 218-229 (December 2017). doi:10.1016/j.apenergy.2017.06.001.
2016
Staten, Matthew ; Persson, Per-Olof ; Chrisochoides, Nikos ; Ledoux, Franck ; Martineau, David ; Lewis, Katherine ; Canann, Scott ; Remacle, Jean-François ; Wu, Xiaohua ; Loeppky, Kathy. 23rd International Meshing Roundtable—Mesh modeling for simulations and visualization. In: Computer-Aided Design, Vol. 72, no.1, p. 1-2 (2016). doi:10.1016/j.cad.2015.11.001.
2016
Makong, L. ; Kameni, A. ; Masson, P. ; Lambrechts, Jonathan ; Bouillault, F.. 3-D modeling of heterogeneous and anisotropic superconducting media. In: IEEE Transactions on Magnetics, Vol. 52, no. 3, p. 7205404 (2016). doi:10.1109/tmag.2015.2497580.
2016
Brozek , C. ; Sun, F. ; Vermaut, P. ; Millet, C. ; Lenain, Astrid ; Embury, D. ; Jacques, Pascal ; Prima, F.. A Beta-titanium alloy with extra high strain-hardening rate: Design and mechanical properties. In: Scripta Materialia, Vol. 114, p. 60-64 (2016). doi:10.1016/j.scriptamat.2015.11.020.
2016
Lin, J. ; Tang, C.Y. ; Huang, C. ; Tang, Y.P. ; Ye, W. ; Li, J. ; Shen, J. ; Van den Broeck, R. ; Van Impe, J. ; Volodin, A. ; Van Haesendonck, C. ; Sotto, A. ; Luis Alconero, Patricia ; Van der Bruggen, B.. A comprehensive physico-chemical characterization of superhydrophilic loose nanofiltration membranes. In: Journal of Membrane Science, Vol. 501, p. 1-14 (2016). doi:10.1016/j.memsci.2015.11.044.
2016
Favache, Audrey ; Ryelandt, Sophie ; Melchior, Maxime ; Zeb, Gul ; Carbonnelle, Pierre ; Raskin, Jean-Pierre ; Pardoen, Thomas. A generic “micro-Stoney” method for the measurement of internal stress and elastic modulus of ultrathin films. In: Review of Scientific Instruments, Vol. 87, no.1, p. 015002 (2016). doi:10.1063/1.4939912.
2016
Nguyen, Van Dung ; Lani, Frédéric ; Pardoen, Thomas ; Morelle, X.P. ; Noels, L.. A large strain hyperelastic viscoelastic-viscoplastic-damage constitutive model based on a multi-mechanism non-local damage continuum for amorphous glassy polymers. In: International Journal of Solids and Structures, Vol. 96, p. 192-216 (2016). doi:10.1016/j.ijsolstr.2016.06.008.
2016
Thiry, Olivier ; Winckelmans, Grégoire. A mixed multiscale model better accounting for the cross term of the subgrid-scale stress and for backscatter. In: Physics of Fluids, Vol. 28, p. 025111. doi:10.1063/1.4941773.
2016
Lapouge, Pierre ; Onimus, Fabien ; Vayrette, Renaud ; Raskin, Jean-Pierre ; Pardoen, Thomas ; Bréchet, Yves. A novel on chip test method to characterize the creep behavior of metallic layers under heavy ion irradiation. In: Journal of Nuclear Materials, Vol. 476, p. 20-29 (2016). doi:10.1016/j.jnucmat.2016.04.014.
2016
Avettand-Fènoël, Marie-Noëlle ; Simar, Aude. A review about Friction Stir Welding of metal matrix composites. In: Materials Characterization, Vol. 120, p. 1-17 (2016). doi:10.1016/j.matchar.2016.07.010.
2016
Blaise, Sébastien ; Lambrechts, Jonathan ; Deleersnijder, Eric. A stabilization for three-dimensional discontinuous Galerkin discretizations applied to nonhydrostatic atmospheric simulations. In: International Journal for Numerical Methods in Fluids, Vol. 81, p. 558-585 (2016). doi:10.1002/fld.4197.
2016
Monsorno, Davide ; Varsakelis, Christos ; Papalexandris, Miltiadis. A two-phase thermomechanical theory for granular suspensions. In: Journal of Fluid Mechanics, Vol. 808, p. 410-440 (December 2016). doi:10.1017/jfm.2016.649.
2016
Pardoen, Thomas ; Colla, Marie-Stéphane ; Idrissi, Hosni ; Amin-Ahmadi, Behnam ; Wang, Binjie ; Schryvers, Dominique ; Bhaskar, Umesh Kumar ; Raskin, Jean-Pierre. A versatile lab-on-chip test platform to characterize elementary deformation mechanisms and electromechanical couplings in nanoscopic objects. In: Comptes rendus. Physique, Vol. 17, no.3-4, p. 485-495 (2016). doi:10.1016/j.crhy.2015.11.005.
2016
De Fusco, Lucio ; Jeanmart, Hervé ; Contino, Francesco ; Blondeau, Julien. Advanced character ization of available not conventional Mediterranean biomass solid fuels for ash related issues in thermal processes. In: Chemical Engineering Transactions, Vol. 50, p. 229-234 (2016). doi:10.3303/CET1650039.
2016
Gilliaux, Maxime ; Lejeune, Thierry ; Sapin, Julien ; Dehez, Bruno ; Stoquart, Gaëtan ; Detrembleur, Christine. Age Effects on Upper Limb Kinematics Assessed by the REAplan Robot in Healthy Subjects Aged 3 to 93 Years. In: Annals of Biomedical Engineering, Vol. 44, no. 4, p. 1224–1233 (2016). doi:10.1007/s10439-015-1396-2.
2016
Andutta, Fernando P. ; Helfer, Fernanda ; de Miranda, Luiz Bruner ; Deleersnijder, Eric ; Thomas, Christopher ; Lemckert, Charles. An assessment of transport timescales and return coefficient in adjacent tropical estuaries. In: Continental Shelf Research, Vol. 124, p. 49-62 (2016). doi:10.1016/j.csr.2016.05.006.
2016
Naithani, J. ; de Brye, B. ; Buyze, E. ; Vyverman, W. ; Legat, V. ; Deleersnijder, Eric. An ecological model for the Scheldt estuary and tidal rivers ecosystem: spatial and temporal variability of plankton. In: Hydrobiologia : the international journal on limnology and marine sciences, Vol. 775, p. 51-67 (2016). doi:10.1007/s10750-016-2710-1.
2016
De Fusco, Lucio ; Defoort, F. ; Rajczyk, R. ; Jeanmart, Hervé ; Blondeau, J. ; Contino, Francesco. Ash Characterization of Four Residual Wood Fuels in a 100 kWthCirculating Fluidized Bed Reactor Including the Use of Kaolin and Halloysite Additives. In: Energy & Fuels, Vol. 30, no.10, p. 8304-8315 (2016). doi:10.1021/acs.energyfuels.6b01784.
2016
Bonny, G. ; Terentyev, D. ; Elena, J. ; Zinovev, Aleksandr ; Minov, B. ; Zhurkin, E.E.. Assessment of hardening due to dislocation loops in bcc iron: Overview and analysis of atomistic simulations for edge dislocations. In: Journal of Nuclear Materials, Vol. 473, no., p. 283-289 (2016). doi:10.1016/j.jnucmat.2016.02.031.
2016
Delannay, Francis ; Missiaen, Jean-Michel. Assessment of solid state and liquid phase sintering models by comparison of isothermal densification kinetics in W and W-Cu systems. In: Acta Materialia, Vol. 106, p. 22-31 (2016). doi:10.1016/j.actamat.2015.12.041.
2016
Amodeo, Jonathan ; dancette, sylvain ; Delannay, Laurent. Atomistically-informed crystal plasticity in MgO polycrystals under pressure. In: International Journal of Plasticity, Vol. 82, p. 177-191 (2016).
2016
Amodeo, J. ; Dancette, S. ; Delannay, L.. Atomistically-informed crystal plasticity in MgO polycrystals under pressure. In: International Journal of Plasticity, Vol. 82, p. 177-191 (2016). doi:10.1016/j.ijplas.2016.03.004.
2016
Dancette, Sylvain ; Browet, Arnaud ; Martin, Guilhem ; Willemet, Marie ; Delannay, Laurent. Automatic processing of an orientation map into a finite element mesh that conforms to grain boundaries. In: Modelling and Simulation in Materials Science and Engineering, Vol. 24, no. 055014, p. 1-14 (2016). doi:10.1088/0965-0393/24/5/055014.
2016
Iavarone, S. ; Galletti, C. ; Contino, Francesco ; Tognotti, L. ; Smith, P.J. ; Parente, A.. CFD-aided benchmark assessment of coal devolatilization one-step models in oxy-coal combustion conditions. In: Fuel Processing Technology, Vol. 154, p. 27-36 (2016). doi:10.1016/j.fuproc.2016.07.013.
2016
Delannay, Francis. Capillary equilibrium and sintering kinetics in dispersed media and catalysts. In: Surface Science, Vol. 648, p. 262-270 (2016). doi:10.1016/j.susc.2015.11.004.
2016
Hannard, Florent ; Pardoen, Thomas ; Maire, Eric ; Le Bourlot, C. ; Mokso, Rajmund ; Simar, Aude. Characterization and micromechanical modelling of microstructural heterogeneity effects on ductile fracture of 6xxx aluminium alloys. In: Acta Materialia, Vol. 103, p. 558-572 (2016). doi:10.1016/j.actamat.2015.10.008.
2016
Van Emelen, Sylvie ; Zech, Yves ; Soares Frazao, Sandra. Closure to“Impact of sediment transport formulations on breaching modelling” by S. VAN EMELEN, Y. ZECH and S. SOARES-FRAZÃO,J. Hydraulic Res. 53(1), 2015, 60−72. In: Journal of Hydraulic Research, Vol. 54, no.4, p. 481-483 (2016). doi:10.1080/00221686.2016.1199054.
2016
Amelio, A. ; Van De Voorde, T. ; Creemers, C. ; Degrève, J. ; Darvishmanesh, S. ; Luis Alconero, Patricia ; Van Der Bruggen, B.. Comparison between exergy and energy analysis for biodiesel production. In: Energy, Vol. 98, p. 135-145 (2016). doi:10.1016/j.energy.2016.01.018.
2016
Meyer, R. ; Figueroa Paredes, D.A. ; Fuentes, M. ; Amelio, A. ; Morero, B. ; Luis Alconero, Patricia ; Van Der Bruggen, B. ; Espinosa, J.. Conceptual model-based optimization and environmental evaluation of waste solvent technologies: Distillation/incineration versus distillation/pervaporation. In: Separation and Purification Technology, Vol. 158, p. 238-249 (2016). doi:10.1016/j.seppur.2015.12.024.
2016
Cao, Le ; Wang, Chenggang ; Mao, Mao ; Grosshans, Holger ; Cao, Nianwen. Derivation of the reduced reaction mechanisms of ozone depletion events in the Arctic spring by using concentration sensitivity analysis and principal component analysis. In: Atmospheric Chemistry and Physics, Vol. 16, no.23, p. 14853-14873 (2016). doi:10.5194/acp-16-14853-2016.
2016
Kuci, Erin ; Henrotte, François ; Duysinx, Pierre ; Dular, Patrick ; Geuzaine, Christophe. Design Sensitivity Analysis for Shape Optimization of Nonlinear Magnetostatic Systems. In: IEEE Transactions on Magnetics, Vol. 52, no.3, p. 1-4 (2016). doi:10.1109/TMAG.2015.2478196.
2016
Turner, S. ; Idrissi, Hosni ; Sartori, A.F. ; Korneychuck, S. ; Lu, Y.-G. ; Verbeeck, J. ; Schreck, M. ; Van Tendeloo, G.. Direct imaging of boron segregation at dislocations in B:diamond heteroepitaxial films. In: Nanoscale, Vol. 8, p. 2212-2218 (2016). doi:10.1039/c5nr07535a.
2016
Lemoine, Guerric ; Delannay, Laurent ; Idrissi, Hosni ; Colla, Marie-Stéphane ; Pardoen, Thomas. Dislocation and back stress dominated viscoplasticity in freestanding sub-micron Pd films. In: Acta Materialia, Vol. 111, p. 10-21 (2016). doi:10.1016/j.actamat.2016.03.038.
2016
Amin-Ahmadi, Behnam ; Connétable, Damine ; Fivel, Marc ; Tanguy, Döme ; Delmelle, Renaud ; Turner, Stuart ; Malet, Loic ; Godet, Stéphane ; Pardoen, Thomas ; Proost, Joris ; Schryvers, Dominique ; Idrissi, Hosni. Dislocation/hydrogen interaction mechanisms in hydrided nanocrystalline palladium films. In: Acta Materialia, Vol. 111, p. 253-261 (April 2016). doi:10.1016/j.actamat.2016.03.054.
2016
Terentyev, D. ; Zinovev, Aleksandr ; Bonny, G.. Displacement cascades in Fe Ni Mn Cu alloys: RVP model alloys. In: Journal of Nuclear Materials, Vol. 475, no., p. 132-139 (2016). doi:10.1016/j.jnucmat.2016.04.005.
2016
Proost, Joris ; Henry, Frédéric ; Tuyaerts, Romain ; Michotte, Sébastien. Effect of internal stress on the electro-optical behaviour of Al-doped ZnO transparent conductive thin films. In: Journal of Applied Physics, Vol. 120, p. 075308 (2016). doi:10.1063/1.4960580.
2016
Jullok, N. ; Van Hooghten, R. ; Luis Alconero, Patricia ; Volodin, A. ; Van Haesendonck, C. ; Vermant, J. ; Van der Bruggen, B.. Effect of silica nanoparticles in mixed matrix membranes for pervaporation dehydration of acetic acid aqueous solution: Plant-inspired dewatering systems. In: Journal of Cleaner Production, Vol. 112, p. 4879-4889 (2016). doi:10.1016/j.jclepro.2015.09.019.
2016
Franzini, Fabian ; Soares Frazao, Sandra. Efficiency and accuracy of Lateralized HLL, HLLS and Augmented Roe's scheme with energy balance for river flows in irregular channels. In: Applied Mathematical Modelling, Vol. 40, no.17-18, p. 7427-7446 (2016). doi:10.1016/j.apm.2016.02.007.
2016
Johnen, Amaury ; Geuzaine, Christophe ; Toulorge, Thomas ; Remacle, Jean-François. Efficient Computation of the Minimum of Shape Quality Measures on Curvilinear Finite Elements. In: Procedia Engineering, Vol. 163, p. 328–339 (novembre 2016). doi:10.1016/j.proeng.2016.11.067.
2016
Navarra, Emiliano ; Mosala Nezhad, Zahra ; Bollen, Xavier ; Gielen, Charles-Edouard ; Mastrobuoni, Stefano ; de Kerchove, Laurent ; Raucent, Benoît ; Astarci, Parla. Endovascular resection of the native aortic valve before transcatheter aortic valve implantation: state of the art and review. In: European Journal of Cardio-Thoracic Surgery, Vol. 50, no. 3, p. 406-410 (2016). doi:10.1093/ejcts/ezw027.
2016
Ye, W. ; Lin, J. ; Tækker Madsen, H. ; Gydesen Søgaard, E. ; Hélix-Nielsen, C. ; Luis Alconero, Patricia ; Van der Bruggen, B.. Enhanced performance of a biomimetic membrane for Na2CO3 crystallization in the scenario of CO2 capture. In: Journal of Membrane Science, Vol. 498, p. 75-85 (2016). doi:10.1016/j.memsci.2015.09.010.
2016
Grosshans, Holger ; Papalexandris, Miltiadis. Evaluation of the parameters influencing electrostatic charging of powder in a pipe flow. In: Journal of Loss Prevention in the Process Industries : the international journal of chemical and process plant safety, Vol. 43, p. 83-91 (09/2016). doi:10.1016/j.jlp.2016.05.002.
2016
De Paepe, W. ; Sayad, P. ; Bram, S. ; Klingmann, J. ; Contino, Francesco. Experimental Investigation of the Effect of Steam Dilution on the Combustion of Methane for Humidified Micro Gas Turbine Applications. In: Combustion Science and Technology, Vol. 188, no.8, p. 1199-1219 (2016). doi:10.1080/00102202.2016.1174116.
2016
Duponcheel, Matthieu ; Mimouni, Stéphane ; Fleau, Solène ; Bartosiewicz, Yann. Experimental and numerical investigations of a two-phase wavy flow. In: Nuclear Engineering and Design, Vol. 321, p. 199-218 (September 2017). doi:10.1016/j.nucengdes.2016.10.031.
2016
Dias, Véronique ; Vandooren, Jacques ; Jeanmart, Hervé. Experimental study and kinetic model of propanal/H2/O2/Ar flames at low pressure. In: Combustion Science and Technology, Vol. 188, no. 4-5, p. 556-570 (2016). doi:10.1080/00102202.2016.1145017.
2016
Pati, Jnyana Ranjan ; Dutta, Subhajit ; Eliaers, Philippe ; Mahanta, Pinakeswar ; Chatterjee, Pradip Kumar ; De Wilde, Juray. Experimental study of paddy drying in a vortex chamber. In: Drying Technology : an international journal, Vol. 34, no.9, p. 1073-1084 (2016). doi:10.1080/07373937.2015.1093498.
2016
Parente, A. ; Malik, M.R. ; Contino, Francesco ; Cuoci, A. ; Dally, B.B.. Extension of the Eddy Dissipation Concept for turbulence/chemistry interactions to MILD combustion. In: Fuel, Vol. 163, p. 98-111 (2016). doi:10.1016/j.fuel.2015.09.020.
2016
Pineau, A. ; Benzerga, A.A. ; Pardoen, Thomas. Failure of metals I: Brittle and ductile fracture. In: Acta Materialia, Vol. 107, p. 424-483 (2016). doi:10.1016/j.actamat.2015.12.034.
2016
Pineau, André ; Amine Benzerga, A. ; Pardoen, Thomas. Failure of metals III: Fracture and fatigue of nanostructured metallic materials. In: Acta Materialia, Vol. 107, p. 508-544 (2016). doi:10.1016/j.actamat.2015.07.049.
2016
Remacle, Jean-François ; Lambrechts, Jonathan. Fast and Robust Mesh Generation on the Sphere – Application to Coastal Domains. In: Procedia Engineering, Vol. 163, no. 1, p. 20-32 (2016). doi:10.1016/j.proeng.2016.11.011.
2016
Boughanmi, Walid ; Henrotte, François ; Benabou, Abdelkader ; Le Menach, Yvonnick. Finite Element Implementation and Experimental Validation of 2-D/3-D Magnetic Force Formulas. In: IEEE Transactions on Magnetics, Vol. 52, no.3, p. 1-4 (2016). doi:10.1109/TMAG.2015.2492018.
2016
Kowalski, Nicolas ; Delannay, Laurent ; Yan, Peng ; Remacle, Jean-François. Finite element modeling of periodic polycrystalline aggregates with intergranular cracks. In: International Journal of Solids and Structures, Vol. 90, p. 60-68 (2016). doi:10.1016/j.ijsolstr.2016.04.010.
2016
Doghri, Issam ; El Ghezal, Marieme Imene ; Adam, Laurent. Finite strain mean-field homogenization of composite materials with hyperelastic-plastic constituents. In: International Journal of Plasticity, Vol. 81, p. 40-62 (june 2016). doi:10.1016/j.ijplas.2016.01.009.
2016
De Fusco, Lucio ; Boucquey, A. ; Blondeau, J. ; Jeanmart, Hervé ; Contino, F.. Fouling propensity of high-phosphorus solid fuels: Predictive criteria and ash deposits characterisation of sunflower hulls with P/Ca-additives in a drop tube furnace. In: Fuel : the science and technology of fuel and energy, Vol. 170, no. 170, p. 16-26 (2016). doi:10.1016/j.fuel.2015.12.017.
2016
Vayrette, Renaud ; Galceran, M. ; Coulombier, Michaël ; Godet, S. ; Raskin, Jean-Pierre ; Pardoen, Thomas. Fracture mechanisms in freestanding polycrystalline silicon films with nanoscale thickness. In: Engineering Fracture Mechanics, Vol. 68, no.Part A, p. 190-203 (December 2016). doi:10.1016/j.engfracmech.2016.10.003.
2016
Bernard, Paul-Emile ; Remacle, Jean-François ; Kowalski, Nicolas ; Geuzaine, C.. Frame field smoothness-based approach for hex-dominant meshing. In: Computer-Aided Design, Vol. 72, no.1, p. 78-86 (2016). doi:10.1016/j.cad.2015.10.003.
2016
Schrooyen, Pierre ; Hillewaert, Koen ; Magin, Thierry E. ; Chatelain, Philippe. Fully implicit discontinuous galerkin solver to study surface and volume ablation competition in atmospheric entry flows. In: International Journal of Heat and Mass Transfer, Vol. 103, p. 108-124 (2016). doi:10.1016/j.ijheatmasstransfer.2016.07.022.
2016
Remacle, Jean-François ; Gandham, R. ; Warburton, T.. GPU accelerated spectral finite elements on all-hex meshes. In: Journal of Computational Physics, Vol. 324, no.1, p. 246-257 (2016). doi:10.1016/j.jcp.2016.08.005.
2016
Chan, Jesse ; Wang, Zheng ; Modave, Axel ; Remacle, Jean-François ; Warburton, T.. GPU-accelerated discontinuous Galerkin methods on hybrid meshes. In: Journal of Computational Physics, Vol. 318, no.1, p. 142-168 (2016). doi:10.1016/j.jcp.2016.04.003.
2016
Ma, Zhao ; Latteur, Pierre ; Mueller, Caitlin. Grammar-based Rhombic Polyhedral Multi-Directional Joints and Corresponding Lattices. In: IASS Annual Symposium 2016 “Spatial Structures in the 21st Century”, Tokyo, Japan.
2016
Anagnostidis, P. ; Varsakelis, C. ; Emmanouilides, C.J.. Has the 2008 financial crisis affected stock market efficiency? The case of Eurozone. In: Physica A: Statistical Mechanics and its Applications, Vol. 447, p. 116-128 (2016). doi:10.1016/j.physa.2015.12.017 (Soumis).
2016
Corten-Gualtieri, Pascale ; Ritter, Christian ; Plumat, Jim ; Keunings, Roland ; Lebrun, Marcel ; Raucent, Benoît. Having students create short video clips to help transition from naïve conceptions about mechanics to true Newtonian physics. In: European Journal of Engineering Education, Vol. 41, no.4, p. 438-454 (2015). doi:10.1080/03043797.2015.1095157.
2016
Mas, Fanny ; Martin, Guilhem ; Lhuissier, Pierre ; Bréchet, Yves ; Tassin, Catherine ; Roch, François ; Simar, Aude. Heterogeneities in local plastic flow behavior in a dissimilar weld between low-alloy steel and stainless steel. In: Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, Vol. 667, p. 156-170 (2016). doi:10.1016/j.msea.2016.04.082.
2016
Zhang, Hong ; Sandu, Adrian ; Blaise, Sébastien. High order implicit-explicit general linear methods with optimized stability regions. In: SIAM Journal on Scientific Computing, Vol. 38, no.3, p. A1430-A1453 (2016). doi:10.1137/15m1018897 (Soumis).
2016
Bokiau,Baudouin ; Ceulemans, Anne-Emmanuelle ; Fisette, Paul. Historical and dynamical study of piano actions: A multibody modelling approach. In: Journal of Cultural Heritage, Vol. 27S, p. S120-S130 (2017). doi:10.1016/j.culher.2016.04.010.
2016
Montero Carrero, M. ; De Paepe, W. ; Bram, S. ; Musin, F. ; Parente, A. ; Contino, Francesco. Humidified micro gas turbines for domestic users: An economic and primary energy savings analysis. In: Energy, Vol. 117, p. 429-438 (2016). doi:10.1016/j.energy.2016.04.024.
2016
De Camillis, Michela ; Di Emidio, Gemmina ; Bezuijen, Adam ; Verástegui Flores, Ramiro Daniel. Hydraulic conductivity and swelling ability of a polymer modified bentonite subjected to wet–dry cycles in seawater. In: Geotextiles and Geomembranes, Vol. 44, no.5, p. 739-747 (2016). doi:10.1016/j.geotexmem.2016.05.007.
2016
Marichal, Yves ; Chatelain, Philippe ; Winckelmans, Grégoire. Immersed interface interpolation schemes for particle–mesh methods. In: Journal of Computational Physics, Vol. 326, no.1, p. 947-972 (2016). doi:10.1016/j.jcp.2016.09.027.
2016
Lai, Qingquan ; Brassart, Laurence ; Bouaziz, Olivier ; Gouné, Mohamed ; Verdier, Marc ; Parry, Guillaume ; Perlade, Astrid ; Bréchet, Yves ; Pardoen, Thomas. Influence of martensite volume fraction and hardness on the plastic behavior of dual-phase steels: Experiments and micromechanical modeling. In: International Journal of Plasticity, Vol. 80, p. 187-203 (2016). doi:10.1016/j.ijplas.2015.09.006.
2016
Van Duc Long, Nguyen ; Quang Minh, Le ; Ahmad, Faizan ; Luis Alconero, Patricia ; Lee, Moonyong. Intensified Distillation-Based Separation Processes:Recent Developments and Perspectives. In: Chemical Engineering and Technology, Vol. 39, no.12, p. 2183-2195 (2016). doi:10.1002/ceat.201500635.
2016
Voleppe, Quentin ; Pardoen, Thomas ; Bailly, Christian. Interdiffusion and phase separation upon curing in thermoset-thermoplastic interphases unravelled by the characterization of partially cured systems. In: Polymer, Vol. 106, p. 120-127 (2016). doi:10.1016/j.polymer.2016.09.066.
2016
Bricteux, Laurent ; Duponcheel, Matthieu ; De Visscher, Ivan ; Winckelmans, Grégoire. LES investigation of the transport and decay of various-strengths wake vortices in ground effect and subjected to a turbulent crosswind. In: Physics of Fluids, Vol. 28, no. 065105 (2016). doi:10.1063/1.4954150.
2016
Grosshans, Holger ; Papalexandris, Miltiadis. Large eddy simulation of triboelectric charging in pneumatic powder transport. In: Powder Technology, Vol. 301, p. 1008-1015 (2016). doi:10.1016/j.powtec.2016.07.031.
2016
Dumont de Chassart, Corentin ; Kluyskens, Virginie ; Dehez, Bruno. Linear State-Space Representation of Heteropolar Electrodynamic Bearings with Radial Magnetic Field. In: IEEE Transactions on Magnetics, Vol. 52, no.1, p. 8100109 (jan. 2016). doi:10.1109/TMAG.2015.2475239.
2016
Van Verdeghem, Joachim ; Dumont de Chassart, Corentin ; Kluyskens, Virginie ; Dehez, Bruno. Linear State-Space Representation of the Axial Dynamics of Electrodynamic Thrust Bearings. In: IEEE Transactions on Magnetics, Vol. 52, no. 10, p. 8300612 (Oct. 2016). doi:10.1109/TMAG.2016.2582727.
2016
Idrissi, Hosni ; Bollinger, Caroline ; Boioli, Francesca ; Schryvers, Dominique ; Cordier, Patrick. Low-temterature plasticity of olivine revisited with in situ TEM nanomechanical testing. In: Science Advances, Vol. 2, p. e1501671 (2016). doi:10.1126/sciadv.1501671.
2016
Latteur, Pierre ; Goessens, Sébastien ; Reniers, Milan ; Zhao, Ma ; Mueller, Caitlin. Masonry Construction with drones. In: "IASS Annual Symposium 2016 “Spatial Structures in the 21st Century”, Tokyo, Japan".
2016
Lai, Qingquan ; Gouné, Mohamed ; Perlade, Astrid ; Pardoen, Thomas ; Jacques, Pascal ; Bouaziz, Olivier ; Bréchet, Yves. Mechanism of Austenite Formation from Spheroidized Microstructure in an Intermediate Fe-0.1C-3.5Mn Steel. In: Metallurgical and Materials Transactions A, Vol. 47, no.7, p. 3375-3386 (2016). doi:10.1007/s11661-016-3547-y.
2016
Heidari, Hamed ; Rivero, Guadalupe ; Idrissi, Hosni ; Ramachandran, Dhanya ; Cakir, Seda ; Egoavil, Ricardo ; Kurttepeli, Mert ; Crabbé, Amandine C. ; Hauffman, Tom ; Terryn, Herman ; Du Prez, Filip ; Schryvers, Dominique. Melamine–Formaldehyde Microcapsules: Micro- and Nanostructural Characterization with Electron Microscopy. In: Microscopy and Microanalysis, Vol. 22, no.06, p. 1222-1232 (2016). doi:10.1017/S1431927616012484.
2016
Chevalier, Jérémy ; Morelle, Xavier ; Bailly, Christian ; Camanho, P.P. ; Pardoen, Thomas ; Lani, Frédéric. Micro-mechanics based pressure dependent failure model for highly cross-linked epoxy resins. In: Engineering Fracture Mechanics, Vol. 158, p. 1-12 (2016). doi:10.1016/j.engfracmech.2016.02.039.
2016
Yan, P. ; Delannay, Laurent ; Payne, J.F.B. ; Tzelepi, A.. Micromechanistic modelling of the polycrystalline response of graphite under temperature changes and irradiation. In: Carbon, Vol. 96, p. 827-835 (2016). doi:10.1016/j.carbon.2015.10.019.
2016
Missiaen, Jean-Michel ; Raharijaona, Jean-Joël ; Delannay, Francis. Modeling the Capillary Pressure for the Migration of the Liquid Phase in Granular Solid–Liquid–Vapor Systems: Application to the Control of the Composition Profile in W-Cu FGM Materials. In: Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, Vol. 47, no.11, p. 5569-5579 (2016). doi:10.1007/s11661-016-3702-5.
2016
Critchell, Kay ; Lambrechts, Jonathan. Modelling accumulation of marine plastics in the coastal zone; what are the dominant physical processes?. In: Estuarine, Coastal and Shelf Science, Vol. 171, p. 111-122 (2016). doi:10.1016/j.ecss.2016.01.036.
2016
Pham Van, Chien ; Gourgue, Olivier ; Sassi, Maximiliano ; Hoitink, A.J.F. ; Deleersnijder, Eric ; Soares Frazao, Sandra. Modelling fine-grained sediment transport in the Mahakam land-sea continuum, Indonesia. In: Journal of Hydro-Environment Research, Vol. 13, p. 103-120 (2016). doi:10.1016/j.jher.2015.04.005.
2016
Van Velthem, Pascal ; Ballout, Wael ; Horion, Jérémy ; Janssens , Y.-A. ; Destoop, Vincent ; Pardoen, Thomas ; Bailly, Christian. Morphology and fracture properties of toughened highly crosslinked epoxy composites: A comparative study between high and low Tg tougheners. In: Composites Part B: Engineering, Vol. 101, p. 14-20 (2016). doi:10.1016/j.compositesb.2016.06.076.
2016
Bokiau, Baudouin ; Ceulemans, Anne-Emmanuelle ; Fisette, Paul. Multibody dynamics as a tool for historical research. Study of an 18th century piano action of Johann Andreas Stein. In: Multibody System Dynamics, Vol. 37, no.1, p. 15-28 (2016). doi:10.1007/s11044-015-9498-z.
2016
Pochet, Maxime ; Dias, Véronique ; Jeanmart, Hervé ; Verhelst, Sebastian ; Contino, Francesco. Multifuel CHP HCCI engine towards flexible power-to-fuel: numerical study of operating range. In: Energy Procedia, Vol. 105, p. 1532-1538. doi:10.1016/j.egypro.2017.03.468.
2016
Kameni, A. ; Seny,B. ; Pichon, L.. Multirate technique for explicit discontinuous galerkin computations of time-domain maxwell equations on complex geometries. In: IEEE Transactions on Magnetics, Vol. 52, no.3, p. 1-4 (2016). doi:10.1109/tmag.2015.2480537 (Soumis).
2016
Krairi, A. ; Doghri, Issam ; Robert, G.. Multiscale high cycle fatigue models for neat and short fiber reinforced thermoplastic polymers. In: International Journal of Fatigue, Vol. 92, p. 179-192 (2016). doi:10.1016/j.ijfatigue.2016.06.029.
2016
Rosso, Angelica ; Saraiva Esteves Pacheco De Almeida, João ; Beyer, Katrin. Numerical simulation of instability of thin reinforced concrete walls using beam elements under tension-compression. In: Revista Portuguesa de Engenharia de Estruturas, Vol. 2, no. 3, p. 83-92 (2016).
2016
Vincent, David ; Karatekin, Ozgür ; Vallaeys, Valentin ; Hayes, Alexander ; Mastrogiuseppe, Marco ; Notarnicola, Claudia ; Dehant, Véronique ; Deleersnijder, Eric. Numerical study of tides in Ontario Lacus, a hydrocarbon lake on the surface of the Saturnian moon Titan. In: Ocean Dynamics, Vol. 66, no. 4, p. 461-482 (April 2016). doi:10.1007/s10236-016-0926-2.
2016
Antoniadis, Panagiotis ; Papalexandris, Miltiadis. Numerical study of unsteady, thermally-stratified shear flows in superposed porous and pure-fluid domains. In: International Journal of Heat and Mass Transfer, Vol. 96, no. c, p. 643-659 (2016). doi:10.1016/j.ijheatmasstransfer.2016.01.056.
2016
Kalbfleisch, Anne-Sophie ; Matthews, Guillaume ; Jacques, Pascal. On the influence of the cooling rate on the martensitic transformation of Ni–Mn–Sn Heusler alloys. In: Scripta Materialia, Vol. 114, p. 121-124 (2016). doi:10.1016/j.scriptamat.2015.12.005.
2016
Varsakelis, C. ; Anagnostidis, P.. On the susceptibility of numerical methods to computational chaos and superstability. In: Communications in Nonlinear Science and Numerical Simulation, Vol. 33, p. 118-132 (2016). doi:10.1016/j.cnsns.2015.09.007 (Soumis).
2016
Toulorge, Thomas ; Lambrechts, Jonathan ; Remacle, Jean-François. Optimizing the geometrical accuracy of curvilinear meshes. In: Journal of Computational Physics, Vol. 310, no.1, p. 361-380 (2016). doi:10.1016/j.jcp.2016.01.023.
2016
Genduso, G. ; Luis Alconero, Patricia ; Van der Bruggen, B.. Overcoming any configuration limitation: An alternative operating mode for pervaporation and vapour permeation. In: Journal of Chemical Technology and Biotechnology, Vol. 91, no. 4, p. 948-957 (2016). doi:10.1002/jctb.4661.
2016
Mouchet, Anne ; Cornaton, Fabien ; Deleersnijder, Eric ; Delhez, Eric M.. Partial ages: diagnosing transport processes by means of multiple clocks. In: Ocean Dynamics : theoretical, computational oceanography and monitoring, Vol. 66, no.3, p. 367-386 (2016). doi:10.1007/s10236-016-0922-6.
2016
Leconte, Patricia ; Ronsse, Renaud. Performance-based robotic assistance during rhythmic arm exercises. In: Journal of NeuroEngineering and Rehabilitation, Vol. 13, no.1, p. 82 (2016). doi:10.1186/s12984-016-0189-7.
2016
Bollen, Pierre ; Quiévy, Nicolas ; Detrembleur, Christophe ; Thomassin, Jean-Michel ; Monnereau, Laure ; Bailly, Christian ; Huynen, Isabelle ; Pardoen, Thomas. Processing of a new class of multifunctional hybrid for electromagnetic absorption based on a foam filled honeycomb. In: Materials & Design, Vol. 89, no. 5 January, p. 323-334 (2016). doi:10.1016/j.matdes.2015.09.129.
2016
Amelio, A. ; Loise, L. ; Azhandeh, R. ; Darvishmanesh, S. ; Calabró, V. ; Degrève, J. ; Luis Alconero, Patricia ; Van Der Bruggen, B.. Purification of biodiesel using a membrane contactor: Liquid-liquid extraction. In: Fuel Processing Technology, Vol. 142, p. 352-360 (2016). doi:10.1016/j.fuproc.2015.10.037.
2016
De Wilde, Juray ; Richards, George ; Benyahia, Sofiane. Qualitative numerical study of simultaneous high-G-intensified gas–solids contact, separation and segregation in a bi-disperse rotating fluidized bed in a vortex chamber. In: Advanced Powder Technology, Vol. 27, no.4, p. 1453-1463 (2016). doi:10.1015/j.apt2016.05.005.
2016
Ballout, Wael ; Coulon, B. ; Janssens, Y.-A. ; Van Velthem, Pascal ; Sclavons, Michel ; Magnin, Delphine ; Pardoen, Thomas ; Bailly, Christian. Quantitative characterization of interdiffusion at the resin-resin and resin-prepreg interphases of epoxy systems processed by model SQ-RTM. In: Polymer Engineering and Science, Vol. 56, no.9, p. 1061-1069 (2016). doi:10.1002/pen.24338.
2016
Li, Kai ; Idrissi, Hosni ; Sha, Gang ; Song, Min ; Lu, Jiangbo ; Shi, Hui ; Wang, Wanlin ; Ringer, Simon P. ; Du, Yong ; Schryvers, Dominique. Quantitative measurement for the microstructural parameters of nano-precipitates in Al-Mg-Si-Cu alloys. In: Materials Characterization, Vol. 118, p. 352-362 (2016). doi:10.1016/j.matchar.2016.06.007.
2016
Li, Wenqi ; Van der Bruggen, B. ; Luis Alconero, Patricia. Recovery of Na2CO3 and Na2SO4 from mixed solutions by membrane crystallization. In: Chemical Engineering Research & Design, Vol. 106, p. 315-326 (2016). doi:10.1016/j.cherd.2015.12.022.
2016
Picasso, C. V. ; Safin, Damir ; Dovgaliuk, Iurii ; Devred, François ; Debecker, Damien P. ; Li, H.-W. ; Proost, Joris ; Filinchuk, Yaroslav. Reduction of CO2 with KBH4 in solvent-free conditions. In: International Journal of Hydrogen Energy, (2016). doi:10.1016/j.ijhydene.2016.04.052 (Accepté/Sous presse).
2016
Genduso, G. ; Amelio, A. ; Colombini, E. ; Luis Alconero, Patricia ; Degrève, J. ; Van der Bruggen, B.. Retrofitting of extractive distillation columns with high flux, low separation factor membranes: A way to reduce the energy demand?. In: Chemical Engineering Research & Design, Vol. 109, p. 127-140 (2016). doi:10.1016/j.cherd.2016.01.013.
2016
Mercier, Thomas. Revenues of Pumped-Storage from Energy and Reserves Markets. In: Revue E tijdschrift, Vol. 2016, p. 1-15 (2016).
2016
Leconte, Patricia ; Orban de Xivry, Jean-Jacques ; Stoquart, Gaëtan ; Lejeune, Thierry ; Ronsse, Renaud. Rhythmic arm movements are less affected than discrete ones after a stroke. In: Experimental Brain Research, Vol. 234, no. 6, p. 1403-1417 (2016). doi:10.1007/s00221-015-4543-y.
2016
Dumont de Chassart, Corentin ; Van Beneden, Maxence ; Kluyskens, Virginie ; Dehez, Bruno. Semi-analytical determination of inductances in windings with axial and azimuthal wires. In: Compel : the international journal for computation and mathematics in electrical and electronic engineering, Vol. 35, no.1, p. 2-15 (2016). doi:10.1108/COMPEL-12-2014-0340.
2016
Grosshans, H. ; Movaghar, A. ; Cao, L. ; Oevermann, M. ; Szász, R.-Z. ; Fuchs, L.. Sensitivity of VOF simulations of the liquid jet breakup to physical and numerical parameters. In: Computers & Fluids, Vol. 136, p. 312-323 (2016). doi:10.1016/j.compfluid.2016.06.018.
2016
Otsubo, M. ; Towhata, I. ; Hayashida, T. ; Shimura, M. ; Uchimura, T. ; Liu, B. ; Taeseri, D. ; Cauvin, B. ; Rattez, Hadrien. Shaking table tests on mitigation of liquefaction vulnerability for existing embedded lifelines. In: Soils and Foundations, Vol. 56, no.3, p. 348-364 (2016). doi:10.1016/j.sandf.2016.04.003.
2016
De Paepe, W. ; Pindado, S. ; Bram, S. ; Contino, Francesco. Simplified elements for wind-tunnel measurements with type-III-terrain atmospheric boundary layer. In: Measurement: Journal of the International Measurement Confederation, Vol. 91, p. 590-600 (2016). doi:10.1016/j.measurement.2016.05.078.
2016
Bieniek, David ; Luckner, Robert ; De Visscher, Ivan ; Winckelmans, Grégoire. Simulation Methods for Aircraft Encounters with Deformed Wake Vortices. In: Journal of Aircraft : devoted to aeronautical science and technology, Vol. 53, no. 6, p. 1581-1596 (2016). doi:10.2514/1.C033790.
2016
Pham Van, Chien ; de Brye, Benjamin ; Deleersnijder, Eric ; Hoitink, A. J. F. ; Sassi, Maximiliano ; Spinewine, Benoit ; Hidayat, Hidayat ; Soares Frazao, Sandra. Simulations of the flow in the Mahakam river–lake–delta system, Indonesia. In: Environmental Fluid Mechanics (Dordrecht, 2001), Vol. 16, no.3, p. 603-633 (2016). doi:10.1007/s10652-016-9445-4.
2016
Kowalski, Nicolas ; Ledoux, F. ; Frey, P.. Smoothness driven frame field generation for hexahedral meshing. In: Computer-Aided Design, Vol. 72, p. 65-77 (2016). doi:10.1016/j.cad.2015.06.009.
2016
Varsakelis, Christos ; Papalexandris, Miltiadis. Stability of wall-bounded, shear flows of dense granular materials: the role of the Couette gap, the wall velocity and the initial concentrationinitial concentration. In: Journal of Fluid Mechanics, Vol. 791, p. 384-413.
2016
Mercier, Thomas. Storage-Based Frequency Control and Grid-Frequency Deviations Forecasting. In: Revue E tijdschrift, Vol. 2016, p. 1-13 (2016).
2016
Terentyev, D. ; Bakaeva, A. ; Pardoen, Thomas ; Favache, Audrey ; Zhurkin, E.E.. Surface hardening induced by high flux plasma in tungsten revealed by nano-indentation. In: Journal of Nuclear Materials, Vol. 476, p. 1-4 (2016). doi:10.1016/j.jnucmat.2016.04.007.
2016
Bahrami, Amir ; Cordenier, François ; Van Velthem, Pascal ; Ballout, Wael ; Pardoen, Thomas ; Nysten, Bernard ; Bailly, Christian. Synergistic local toughening of high performance epoxy-matrix composites using blended block copolymer-thermoplastic thin films. In: Composites Part A: Applied Science and Manufacturing, Vol. 91, p. 398-405 (2016). doi:10.1016/j.compositesa.2016.08.038.
2016
Montero Carrero, M. ; De Paepe, W. ; Parente, A. ; Contino, Francesco. T100 mGT converted into mHAT for domestic applications: Economic analysis based on hourly demand. In: Applied Energy, Vol. 164, p. 1019-1027 (2016). doi:10.1016/j.apenergy.2015.03.032.
2016
Lin, J. ; Ye, W. ; Baltaru, M.-C. ; Tang, Y.P. ; Bernstein, N.J. ; Gao, P. ; Balta, S. ; Vlad, M. ; Volodin, A. ; Sotto, A. ; Luis Alconero, Patricia ; Zydney, A.L. ; Van der Bruggen, B.. Tight ultrafiltration membranes for enhanced separation of dyes and Na
2016
Le Bars, Yoann ; Vallaeys, Valentin ; Deleersnijder, Eric ; Hanert, Emmanuel ; Carrere, Loren ; Channelière, Claire. Unstructured-mesh modeling of the Congo river-to-sea continuum. In: Ocean Dynamics : theoretical, computational oceanography and monitoring, Vol. 66, no.4, p. 589-603 (2016). doi:10.1007/s10236-016-0939-x.
2016
Luis Alconero, Patricia. Use of monoethanolamine (MEA) for CO2 capture in a global scenario: Consequences and alternatives. In: Desalination, Vol. 380, p. 93-99 (2016). doi:10.1016/j.desal.2015.08.004.
2016
Goessens, Sébastien ; Mueller, Caitlin ; Latteur, Pierre. Vers une "Robonumérisation" de la construction ?. In: 34èmes Rencontres de l’AUGC, Université de Liège, Belgique.
2016
Eliaers, Philippe ; De Wilde, Juray. Vortex chambers: a novel technology for drying, coating and producing particles in the food and feed industry. In: Food Science & Law, Vol. 2016, no. 4, p. 142-144 (2016).
2016
Ruiz Garate, Virginia ; Parri, Andrea ; Yan, Tingfang ; Munih, Marko ; Molino Lova, Raffaele ; Vitiello, Nicola ; Ronsse, Renaud. Walking Assistance Using Artificial Primitives: A Novel Bioinspired Framework Using Motor Primitives for Locomotion Assistance Through a Wearable Cooperative Exoskeleton. In: IEEE Robotics and Automation Magazine, Vol. 23, no.1, p. 83-95 (2016). doi:10.1109/MRA.2015.2510778.
2016
Dumont de Chassart, Corentin ; Kluyskens, Virginie ; Dehez, Bruno. Yokeless radial electrodynamic bearing. In: Mathematics and Computers in Simulation, Vol. 130, p. 57-69 (December 2016). doi:10.1016/j.matcom.2015.10.003.
Provided by DIAL