PhD Theses
IMMC
SST/IMMC
2018
Hannard, Florent. 3D characterization, modelling and tailoring of microstructure heterogeneity effects on damage and fracture of 6xxx aluminium alloys, prom. : Pardoen, Thomas ; Simar, Aude, 24/01/2018.
2018
Van Damme, Stefanie. Advanced biofuels : oxidation kinetics of methyl pentanoate and life cycle assessment of triacetin, prom. : Contino, Francesco ; Jeanmart, Hervé, 13/03/2018.
2018
Delroisse, Pauline. AlSi10Mg lattice structures produced by Selective Laser Melting : from microstructure characterization to impact resistance, prom. : Simar, Aude ; Jacques, Pascal, 13/11/2018.
2018
Martin, Benoît. Autonomous microgrids for rural electrification : joint investment planning of power generation and distribution through convex optimization, prom. : Glineur, François ; De Jaeger, Emmanuel, 09/05/2018.
2018
Ruiz Salmon, Israel. CO2 capture and crystallization as sodium carbonate using membrane contactors, prom. : Luis Alconero, Patricia, 25/09/2018.
2018
Carlier d'Odeigne, Olivier. Caractérisation de l'évolution morphologique d'une rivière soumise à des crues rapides en Haïti, prom. : Soares-Frazão, Sandra, 25/10/2018.
2018
Lamberts, Olivier. Choking and mixing phenomena in supersonic ejectors, prom. : Bartosiewicz, Yann ; Chatelain, Philippe, 07/09/2018.
2018
El Ghezal, Marieme Imene. Contributions to nonlinear micromechanical modeling of composite and porous materials under small and large deformation, prom. : Doghri, Issam, 01/03/2018.
2018
Parmentier, Philippe. Coupling a vortex particle-mesh method for compressible flows with a discontinuous Galerkin solver, prom. : Chatelain, Philippe ; Winckelmans, Grégoire, 08/11/2018.
2018
Fent, Ilaria. Dam break over mobile bed : experimental and numerical study , prom. : Soares-Frazão, Sandra ; Ferreira, Rui ML, 09/02/2018.
2018
Lorieul, Gaël. Development and validation of a 2D Vortex Particle-Mesh method for incompressible multiphase flows, prom. : Bartosiewicz, Yann ; Chatelain, Philippe, 21/08/2018.
2018
Gori, Gian Luca. Development of gas temperature imaging by Laser-Induced Fluorescence for internal cooling channels, prom. : Arts, Tony, 20/12/2018.
2018
Vallaeys, Valentin. Discontinuous Galerkin finite element modelling of estuarine and plume dynamics, prom. : Deleersnijder, Eric ; Hanert, Emmanuel, 30/08/2018.
2018
Berger, Benjamin. Experimental and numerical investigation of a two-stage downdraft biomass gasification process, prom. : Jeanmart, Hervé, 17/08/2018.
2018
Tuyaerts, Romain. Internal stress and opto-electronic properties of pure and Al-doped ZnO thin films deposited by reactive sputtering, prom. : Proost, Joris ; Raskin, Jean-Pierre, 05/12/2018.
2018
Moens, Maud. Large eddy simulation of wind farm flows : improved Actuator Disk model and investigations of wake phenomena, prom. : Chatelain, Philippe ; Winckelmans, Grégoire, 19/09/2018.
2018
Chevalier, Jérémy. Micromechanics of an epoxy matrix for fiber reinforced composites : experiments and physics-based modelling, prom. : Pardoen, Thomas ; Lani, Frédéric, 19/11/2018.
2018
Monsorno, Davide. Modelling and simulation of fluid-saturated granular materials with application to sedimentation flows, prom. : Papalexandris, Miltiadis ; Dimas, Athanassios, 05/02/2018.
2018
Beckers, Guillaume. Modelling of electromagnetic and piezoelectric peristaltic micropumps, prom. : Dehez, Bruno, 27/02/2018.
2018
Sfouni-Grigoriadou, Maria Angeliki. Numerical modelling and experimental characterization of slide-induced debris flows transitioning to turbidity currents, prom. : Spinewine, Benoit ; Soares-Frazao, Sandra, 31/08/2018.
2018
Jimenez Mena, Norberto. Optimization of the friction melt bonding of aluminium and steel : from microstructure evolution to mechanical properties, prom. : Jaques, Pascal ; Simar, Aude, 06/03/2018.
2018
Buckingham, Sophia. Prandtl number effects in abruptly separated flows : LES and experiments on an unconfined backward facing step flow, prom. : Winckelmans, Grégoire ; Bartosiewicz, Yann, 29/08/2018.
2018
Lemoine, Guerric. Time dependent plasticity and strain localization in nanocrystalline metallic thin films, prom. : Delannay, Laurent ; Pardoen, Thomas, 30/04/2018.
2018
Frère, Ariane. Towards wall-modeled Large-Eddy Simulations of high Reynolds number airfoils using a discontinuous Galerkin method, prom. : Chatelain, Philippe ; Winckelmans, Grégoire, 01/06/2018.
2017
De Fusco, Lucio. Assessment of ash agglomeration and fouling in combustion by theoretical and experimental biomass fuels characterization, prom. : Jeamart, Hervé, 30/01/2017.
2017
Everarts, Christophe. Design and study of a new continuously variable transmission with potential application to lower limb prosthesis, prom. : Ronsse, Renaud ; Dehez, Bruno, 15/11/2017.
2017
Delandmeter, Philippe. Discontinuous Galerkin finite element modelling of geophysical and environmental flows, prom. : Deleersnijder, Eric ; Legat, Vincent ; Remacle, Jean-François, 05/09/2017.
2017
Dell'Era, Giulia. Experimental characterization of instability onsets in a high speed axial compressor, prom. : Arts, Tony, 05/05/2017.
2017
Habra, Timothée. Gaze stabilization of humanoid robots based on internal model, prom. : Ronsse, Renaud, 12/10/2017.
2017
Dumont de Chassart, Corentin. Heteropolar null-flux electrodynamic bearings for the passive radial suspension of rotors, prom. : Dehez, Bruno, 15/03/2017.
2017
Thiry, Olivier. Investigation of wall shear stress models for large eddy simulation, prom. : Winckelmans, Grégoire, 20/01/2017.
2017
Bourgeois, Nicolas. Numerical study of multi-dimensional effects in Rapid Compression Machines, prom. : Jeanmart, Hervé ; Contino, Francesco, 22/12/2017.
2017
Marteleur, Matthieu. On the plasticity mechanisms of β metastable Ti alloys, towards enhanced work hardening, prom. : Jacques, Pascal, 01/02/2017.
2017
Franzini, Fabian. One-dimensional modeling of the flows and morphological changes in rivers : experimental and numerical approaches, prom. : Soares-Frazão, Sandra, 30/03/2017.
2017
Abedrabbo Ode, Gabriel. Quantification of intervertebral efforts using a multibody dynamics approach : application to scoliosis, prom. : Fisette, Paul ; Cartiaux, Olivier, 31/01/2017.
2017
Van der Noot, Nicolas. Rich and robust bio-inspired locomotion control for humanoid robots, prom. : Ronsse, Renaud ; Ijspeert, Auke, 30/08/2017.
2017
Leconte, Patricia. Robotic assessment and rehabilitation of rhythmic upper-limb movement primitives after stroke, prom. : Ronsse, Renaud, 20/10/2017.
2017
Rosales Trujillo, Waldo. Towards application of vortex chamber technology as a rotating fluidized bed reactor, prom. : De Wilde, Juray, 24/08/2017.
2017
Georgiou, Michail. Turbulent heat transfer in T-junctions, prom. : Papalexandris, Miltiadis, 04/12/2017.
2017
Ribesse, Arnaud. Wear and erosion performance of metal-polymer hybrid materials facing multi-scale contact interactions, prom. : Pardoen, Thomas ; Jacques, Pascal, 19/10/2017.
2016
Tummala, Hareesh. 3D discrete dislocation dynamics simulations of polycrystalline films and silicon electrostatics, prom. : Pardoen, Thomas ; Fivel, Marc, 12/12/2016.
2016
Bokiau, Baudouin. Analysing the design evolution of late 18th century Prellzungenmechaniken : an experiment-based multibody approach applied to early piano actions, prom. : Fisette, Paul ; Ceulemans, Anne-Emmanuelle, 04/10/2016.
2016
Ruiz Garate, Virginia. Bio-inspired motor primitives for controlling leg exoskeletons, prom. : Ronsse, Renaud ; Fisette, Paul, 08/06/2016.
2016
Mbuyi Katshiatshia , Haddy. Characterization of ethyl valerate combustion by analyzing low pressure flames, prom. : Jeanmart, Hervé ; Dias, Véronique, 03/03/2016.
2016
Bollen, Xavier. Design of a device for minimally invasive aortic valve resection, prom. : Raucent, Benoît ; Astarci, Parla, 23/06/2016.
2016
Bricteux, Gaëtan. Engineering analysis with non conforming meshes and levelsets, prom. : Remacle, Jean-François, 14/10/2016.
2016
Henry, François. Experimental and modeling investigations on droplet entrainment in a PWR hot leg under stratified flow conditions , prom. : Bartosiewicz, Yann ; Valette, Michel, 23/08/2016.
2016
Marchal-Marchant, Valentin. On the physics of thick copper film deposition by an innovative thermal evaporation process, prom. : Jacques, Pascal, 28/09/2016.
2016
Hamdi, Sami. Pipe pile driving into rock, prom. : Holeyman, Alain, 21/01/2016.
2016
Wucher, Benoît. Predicting and compensating distortions of composite parts , prom. : Pardoen, Thomas ; Bailly, Christian, 07/12/2016.
2016
Haouala, Sarra. Time and space (4D) homogenization for viscoelastic-viscoplastic solids under large numbers of cycles, prom. : Doghri, Issam, 11/01/2016.
2015
Roy, Geoffrey. Design of a new type of thermoelectric generator with potential application to large-scale energy harvesting systems, prom. : Jacques, Pascal ; Matagne, Ernest, 10/02/2015.
2015
de Radiguès de Chennevières , Quentin. Electrochemical process intensification : from porous electrodes to fluidized bed reactors, prom. : Proost, Joris ; De Wilde, Juray, 16/12/2015.
2015
Sans, Jérôme. Experimental and numerical investigations of solidity effects on compressor performance and stability, prom. : Arts, Tony ; Chatelain, Philippe, 30/04/2015.
2015
Parmentier, Nicolas. Experimental characterization and numerical simulation of packed beds of wood particles, prom. : Jeanmart, Hervé, 01/06/2015.
2015
Bhaduri, Subir Swaraj. Experimental studies on HCCI combustion of biomass syngas towards tar tolerant operation, prom. : Jeanmart, Hervé, 10/09/2015.
2015
Bollen, Pierre. Hierarchical hybrid materials combining wideband electromagnetic absorption and mechanical performance, prom. : Huynen, Isabelle ; Pardoen, Thomas ; Bailly, Chistrian, 09/03/2015.
2015
Morelle, Xavier. Mechanical characterization and physics-based modeling of highly-crosslinked epoxy resin, prom. : Pardoen, Thomas ; Bailly, Christian, 16/12/2015.
2015
Antoniadis, Panagiotis Dimitrios. Modeling and numerical simulation of transient flows in superposed porous and pure-fluid layers, prom. : Papalexandris, Miltiadis, 29/10/2015.
2015
Thomas, Christopher. Modelling marine connectivity in the Great Barrier Reef and exploring its ecological implications, prom. : Hanert, Emmanuel ; Deleersnijder, Eric, 28/08/2015.
2015
Krairi, Anouar. Multiscale modeling of the damage and failure of homogeneous and short-fiber reinforced thermoplastics under monotonic and fatigue loadings, prom. : Doghri, Issam, 24/11/2015.
2015
de Chaunac, Henri. Numerical investigation of the set-up around the shaft of a driven pile in clay, prom. : Holeyman, Alain, 14/12/2015.
2015
Schrooyen, Pierre. Numerical simulation of aerothermal flows through ablative thermal protection systems, prom. : Chatelain, Philippe ; Papalexandris, Miltiadis, 16/11/2015.
2015
van der Rest, Camille. Optimisation of Heusler Fe2VAl-based thermoelectric compounds through innovative metallurgical processing, prom. : Jacques, Pascal J. ; Simar, Aude, 23/03/2015.
2015
Ghidelli, Matteo. Size dependent mechanical behavior of Zr-Ni thin metallic glass films, prom. : Raskin, Jean-Pierre ; Blandin, Jean-Jacques, 26/05/2015.
Provided by DIAL